



Results 1 to 2 of 2
Thread: Kwila Stain
-
6th January 2008, 07:02 AM #1
Kwila Stain
Just finished this deck, I use Kwila,is that the same as Merebu?
Was wondering what oils I could put on it to keep the red look of the timber, How long should it weather before I put anything on it? would you guys reccommend?
-
6th January 2008, 07:14 AM #2
Kwila and Merbau are the same.
I've just finished a table in Merbau and used Intergrain natural finish, which is >60% Wood Turpentine as the finish.(see my post about a Chrissy table in the woodwork pics forum) It goes on very easily and keeps the red colour well (at least I hope it will.) I put it on immediately after I had finished the table and will refinish whenever I feel it necessary. You don't need much. I used about a litre for the total job.
It's also available in Merbau "colour."
Regards,
Rob
Similar Threads
-
Should I stain my Kwila deck before oiling?
By lsneesby in forum DECKINGReplies: 5Last Post: 21st August 2007, 11:12 AM -
Kwila Fence
By saml in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 2Last Post: 19th December 2006, 11:30 AM
Bookmarks