Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: WOODWORKING QUIZ for 31 July 04
-
31st July 2004, 09:51 PM #1
SENIOR MEMBER
- Join Date
- Apr 2004
- Location
- London, Ohio
- Age
- 91
- Posts
- 524
- Post Thanks / Like
WOODWORKING QUIZ for 31 July 04
Good Evening Friends,
Dovetail bits come in an array of cutting angles usually 7 - 14 degrees and heights, on both 1/4" and 1/2" shanks. Generally speaking, the greater the cutting angle the stronger the joint.
There are three parts of a dovetail, can you name them?
Respectfully,
Ralph Jones Woodworking
London, Ohio
-
31st July 2004, 10:42 PM #2
Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
- Post Thanks / Like
Parsons nose
Feathers
Mites
Al
-
1st August 2004, 09:37 PM #3
SENIOR MEMBER
- Join Date
- Apr 2004
- Location
- London, Ohio
- Age
- 91
- Posts
- 524
- Post Thanks / Like
WOODWORKING QUIZ ANSWER for 31 July 04
Good Evening Friends,
The answer for todays quiz is TAIL, PIN, and SOCKET or OPENING.
Respectfully,
Ralph Jones Woodworking
London, Ohio
Reply With Quote
Bookmarks