Sunday Round Table Jabber - Sunday evening all welcome

[Pagie]

We had our 57th in July. It only gets better from now on.

[skot]

SNAP Oldgreybeard......It's our 39th anniversary today as well.

[Simplicity]

Another lovely Sunday night chat dominate by the Star sign Leo.

Mostly about marking knives with a few deviations.
With only one Cancer star sign in attendance .

Cheers Matt.

[Bushmiller]

Another lovely Sunday night chat dominate by the Star sign Leo.


Cheers Matt.

matt

That is a Leo trait.

Regards
Paul

[Bushmiller]

This is the little carving/hobby knife set to which I referred. I said I didn't know where I bought it, but with the Workzone brand on it I am thinking Aldi. It is complete, primarily because I have not yet used it.

I think it will be very useful if I ever find a use for it.

P1070952 (Medium).JPGP1070953 (Medium).JPG

Regards
Paul

[DaveVman]

I think it will be very useful if I ever find a use for it.

Quote of the day goes to Paul!!

[Simplicity]

Sunday is hear again the end of the Week.

That means Sunday Night Jabber is yet once again.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Tonight’s hot to trot subject matter,is i have know idea,an I’m afraid i have a Hot date with the Wife,watching James Bond on a very large screen.
So unfortunately i wont be in attendance this evening,so you regularisers have my blessing to be free radicals.

Start Time 7.30 ish AEST
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL


See Ya 7.30 ish Matt(Not tonight you wont.)

[doug3030]

Tonight’s hot to trot subject matter,is i have know idea,an I’m afraid i have a Hot date with the Wife,watching James Bond on a very large screen.

I took Jools to see the James Bond movie last night for her birthday. We went to see it at Coburg Drive-in so we had comfy seats and were safely isolated from the unwashed masses who may or may not be infected with Covid.

I hope you enjoy the movie. We did.

I should be there for the chatter tonight.

[Oldgreybeard]

Following on from Matt's comments
Mostly about marking knives with a few deviations.

I have been offered a broken 315mm diameter broken Brobo Metal cutting mitre saw blade. It is probably 20 years old and thought to be a tool steel - possibly a HSS. Is it any good for knife making?
I will have more info in a couple of weeks.

Bob

[Simplicity]

Following on from Matt's comments
Mostly about marking knives with a few deviations.

I have been offered a broken 315mm diameter broken Brobo Metal cutting mitre saw blade. It is probably 20 years old and thought to be a tool steel - possibly a HSS. Is it any good for knife making?
I will have more info in a couple of weeks.

Bob

Bob,
Considering your last “discussions” with regarding “Tool steel” its going to be Epic

[doug3030]

Following on from Matt's comments
Mostly about marking knives with a few deviations.

I have been offered a broken 315mm diameter broken Brobo Metal cutting mitre saw blade. It is probably 20 years old and thought to be a tool steel - possibly a HSS. Is it any good for knife making?
I will have more info in a couple of weeks.

Bob

Bob. that's the sort of question which, if asked on a knifemaking forum, would result in bitter arguments and probable bloodshed.

My personal take on it is that the cost of a piece of new steel is less than the cost of the wasted time spent working on a piece of unknown steel that has a 50-50 chance of working or not for the given task.

Also for knifemaking, HSS does not really hold a fine edge well. It is good with edges angled closer to the vicinity of 90 degrees like lathe cutting tools, but not edges used on knives which are often well under 10 degrees.

Heat treatment and tempering would also be difficult in the home workshop environment.

[Simplicity]

Sunday is hear again the end of the Week.

That means Sunday Night Jabber is yet once again.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Tomorrows hot to trot subject matter(Not that we stick to it,but we do try)
Drum roll Please, its everything to do with using an processing Green timber,not wood that is painted green, Green timber that may have been a tree in the ground only a few days past.



Start Time 7.30 ish AEST
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL







Blackwood

See ya 7.30 ish

Cheers Matt .

[jools13]

the information re Solar Kiln's and my friends paper - Drying Tectona grandis boards using the simulating solar kiln conditions technique :: BioResources

[Simplicity]

Sunday is hear again the end of the Week.

That means Sunday Night Jabber is yet once again.

All welcome, if your a member on this fine forum your welcome to join us.
It is a BYO gathering.

Tonight’s hot to trot subject matter(Not that we stick to it,but we do try)
World domination through the art of fine tools.
Bring out the bling tonight please.
Why tools should be made “BEAUTIFULLLLLL”


Start Time 7.30 ish AEST
That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

The Get together is held using Skype,you are able to join in by just joining as a Guest.

Https://join.skype.com/u73k1kv4B1UL


See Ya 7.30 ish Matt

[doug3030]

If we are home in time I will be there.

Today we are exercising our new-found freedom to visit friends outside of Melbourne.