Thanks Thanks:  0
Likes Likes:  1
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2020
    Location
    scone
    Age
    45
    Posts
    25

    Default Square set plasterboard type

    For squareset should I get sheets with one edge square or both recessed?

  2. #2
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,343

    Default

    Sheet sizes and availability is usually limited with one side not tapered board and the sizes are aimed to suit commercial fittouts and I think it is dearer too.
    I cant recall ever seeing it being used on domestic work as the requirements vary too much. Your setting bead works fine in all scenarios whether you have a tapered or square edge sheet end regardless

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •