Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: welding inverters
-
28th January 2012, 07:58 AM #1New Member
- Join Date
- Jan 2012
- Location
- cyprus
- Posts
- 1
welding inverters
I am an amateur electronic technician ,,,and i have a fronius welding machine transpocket 1500 ......2004 model and i want to have if anybody can help me to have the electronic diagram of it to check the electronic parts of it .
I want to fix it with a low budget cost or to change the main board ..can anyone help if you people have anything of the above ,,it will be apreciatated
-
28th January 2012, 10:09 AM #2Engineers are qualified to make claims
- Join Date
- Dec 2010
- Location
- Victoria
- Posts
- 81
I beleive these have surface mount components on the control boards is this correct? If so you would need a reflow station but worse is diagnosing such small components. I know boards are very expensive.
John
-
28th January 2012, 09:35 PM #3China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 3,150
SMD's can be replaced by hand, if you are skilled at soldering, I would contact Fronius direct I have taken this approach with other companies and it can sometimes be suprising how much they are willing to help