Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: block survey ?

  1. #1
    Join Date
    Jul 2003
    Location
    rural qld
    Age
    68
    Posts
    139
    Post Thanks / Like

    Default block survey ?

    ok just seeking some advice here
    my block ( odd shaped ) corner block has no fences except for the boundary fence between nieghbours and i ( side neighbours none at rear) yesterday was working out where fences should be and found that block is even more odd shaped than i was thinking

    appears that i mught have extra 10 to 15 mtrs of backyard the block measurements are shared fence 51 mts front 73 mts side fence 84mts rear 28mts as said odd shape

    if take the one and only right angle off side fence the front fence on my block is on the front of hse ie no frt yard at all

    if take verge measuremants and measure from kerd to front of where i think fence should be ( same distance as next door hse ) works out where the letterbox and water meter is then i appear to have long side fence cutting thru the middle of shed in back yard and ends in the middle of side st and shared fence ends up at a angle some 6 mts into my yard at (their ) back fence line so a real muddle


    so what do u guys suggest
    go to coucil and ask them what is going on ?
    get it surveyed and see where everything ends up and then go to coucil ?
    sell up fast and get rid of it ?

    am at stage dont knoiw what to do hope you blokes can get what i am talking about and any suggestions would be good shed in backyard would hate to have to move it and "new " land at rear is full of rubbish and rocks i thought my block finished level with back wall of shed but now appears not to
    anyway thks for any input

  2. #2
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208
    Post Thanks / Like

    Default

    the only safe way is to get it surveyed
    Regards, Bob Thomas

    www.wombatsawmill.com

  3. #3
    Join Date
    Oct 2003
    Location
    Sydney,Australia
    Posts
    42
    Post Thanks / Like

    Default

    Wot echidna says. And make sure the surveyor is fully licenced & insured, so if he stuffs up you have some comeback with his professional insurance - don't go the cheapo 'I can do if for a slab on me days orf' deal.

  4. #4
    Join Date
    Jan 2006
    Location
    Bowral, NSW, Australia
    Age
    75
    Posts
    28
    Post Thanks / Like

    Default

    You should be able to get a plan from council that will have some sort of reference mark somewhere near your property. Go from there and get a better idea for yourself before bringing in the big guns.

    Carry Pine

  5. #5
    Join Date
    Aug 2006
    Location
    Sydney
    Age
    65
    Posts
    1,248
    Post Thanks / Like

    Default

    In my experience the Councils plans aren't that accurate. I'd go the surveyor but beware that once you know where the boundaries and you sell the property on the basis of an old survey...the purchaser could have a comeback.
    How long have you had the property? What survey plan was the property purchased under? Have you any comeback (if you have a problem) to the old vendor?

  6. #6
    Join Date
    Mar 2006
    Location
    Mildura, Victoria
    Posts
    379
    Post Thanks / Like

    Default

    I'm assuming you have recently purchased the land so amongst the paperwork you should have been supplied a copy of the land title - now this may, or may not, include a diagram of the land. There should be, at least, a description with angles, dimensions, compass bearings, and any easements.
    With that iinformation finding the survey pegs should be a bit easier - if you don't have this you'd be foolish to erect ANY building until a licensed surveyor has measured-up and pegged out the block according to the sub-division plan which should be available from your local council, or the Land Titles Office.

    soth

  7. #7
    Join Date
    Jul 2003
    Location
    rural qld
    Age
    68
    Posts
    139
    Post Thanks / Like

    Default

    bought the land about 2 yrs ago with house on it

    only got a lot plan in the paper work which shows plan of block ,length of fence lines and thats all no compass bearings etc

    absolutely no survey pegs anywhere and no mention of any landmarks to take bearings from

    have managed to get a 1942 block map that dose have compass bearings on so will look at that first only thing is with taht , is block is measured in something other than feet as the 86 mt side is 400 and something long

    but will still be able to use the compass bearing to work it out ?


    think part of problem is that the maps show side street as angleing off main rd straight but the road thats there now has a nice curve in it that seems to be taking it very close to where the back fence should be


    really think i will just get a rough idea of where its all supposed to be and then will go to the coucil and see what they say

  8. #8
    Join Date
    Apr 2005
    Location
    Sydney
    Age
    64
    Posts
    882
    Post Thanks / Like

    Default

    I built an extension on my sister's house and since I was building right up to the minimum 900mm side boundary set back, I got a surveyor in before I turned a shovel. It turned out that the opposite neighbour had pinched a foot of my sister's land, and she had pinched a foot from the neighbour where the extension was going. The sub division dated back to when there were cows roaming in a paddock.
    So after a six month delay, with the surveyor trying to get the boundary formalized, it turned out that everyone had 'squatters rights' because the fences had been up for so long and no one had complained. So the moral of the story is, if someone puts a fence up on your boundary, you'd better check it or you might be losing a bit of land, never to be returned.

    It also reminds me of a story that my old man once told me about a block in the city. I don't know if someone told him a tall tale, or if he read it somewhere.
    Anyway, a bloke started putting up a building right on his boundary, and his neighbour came along with a surveyor and told the bloke that he'd pinched an inch of his land and he wanted it back. The first bloke tried to buy the inch of land off him for a reasonable price, but the guy was an 4$$hole and wanted a fortune for it because he knew it would cost the first bloke a fortune to tear down what he'd already built. The first bloke wouldn't pay, so he just tore down what he'd built and started again. But here's the clever bit. He moved it back two inches, not just one.
    So when the second bloke came along and slapped up his building hard against the first bloke's building, he ended up having to pay the first bloke a fortune to buy an inch of his land.
    Even after paying to demolish and re-build, the first bloke made a profit out of his 4$$hole neighbour.

    It might be BS, but it's a good 'karma' yarn anyway.


  9. #9
    Join Date
    Sep 2004
    Location
    Strzelecki Ranges Victoria
    Posts
    395
    Post Thanks / Like

    Default

    dzcook the measurements will be in links - 1 link = 201.168mm
    by all means check it out yourself as much as possible but at the end of the day get a professional survey done.
    murpheys 5th law [translated] states - if you do nothing you will get bitten on bum !

    the council will most likely will not be of assistance. they would normally come back to you suggesting you to get a survey.
    Peter Clarkson

    www.ausdesign.com.au

    This information is intended to provide general information only.
    It does not purport to be a comprehensive advice.

  10. #10
    Join Date
    Feb 2007
    Location
    Brisbane
    Posts
    3
    Post Thanks / Like

    Default

    Anyone know how much a boundary survey would cost for an average suburban block (straight lines and no easements)?

  11. #11
    Join Date
    Mar 2001
    Location
    forest. tasmainia
    Age
    92
    Posts
    86
    Post Thanks / Like

    Default

    cost me $850.00.
    p.t.c

  12. #12
    Join Date
    Feb 2007
    Location
    Brisbane
    Posts
    3
    Post Thanks / Like

    Default

    Quote Originally Posted by ptc View Post
    cost me $850.00.
    Really that much? Thought it would only be half a day's work at most for a suburban block.

  13. #13
    Join Date
    Aug 2005
    Location
    Victoria
    Posts
    412
    Post Thanks / Like

    Default

    It would only be half a days work, but they need an assistant, and need to do title searches etc as well.

    Tools

  14. #14
    Join Date
    Jul 2003
    Location
    rural qld
    Age
    68
    Posts
    139
    Post Thanks / Like

    Default

    well i think that the new neighbours have started survey their block anyway as i have had a survey post found in the corner of my yard that was about 4inches underground and it wasnt me digging it up is a round metal plague says something like offical survey peg and is in line with where i thought that my front fence should be

    thing is they havent said anything about starting a survey for their fences and never said taht they where looking either but the one peg really dosent help me that much as none of my corners are square anyway but dose give me a start

    Now when i start the fences should my fence post go alongside the survey peg or inside of it or where ?

  15. #15
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    67
    Posts
    1
    Post Thanks / Like

    Default

    Quote Originally Posted by ptc View Post
    cost me $850.00.
    Cost us about $400 on a small block in Cairns 10 years ago.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

Similar Threads

  1. concrete block - pipe running through it?
    By gsouth in forum CONCRETING
    Replies: 1
    Last Post: 4th September 2006, 01:54 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •