Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 8 of 8

Thread: Danish vs Teak

  1. #1
    Join Date
    Jan 2003
    Location
    Osaka
    Posts
    346
    Post Thanks / Like

    Default Danish vs Teak

    Can someone tell me the difference between Danish oil and Teak oil (besides the spelling)?

    So far I have been able to work out that they are both a polymerised, refined, linseed oil. Beyond that, I'm not sure. They both stink, and are roughly the same colour and viscosity.

  2. #2
    Join Date
    Jun 2003
    Location
    Western Sydney
    Posts
    149
    Post Thanks / Like

    Default

    Daniswh oil has a higher concentration of syntetic polymers (poly or alkyd resins) - harder finish.

    Cheers,
    Theva

  3. #3
    Join Date
    Apr 2000
    Location
    Geelong South
    Age
    75
    Posts
    402
    Post Thanks / Like

    Default

    Danish Oil in simple terms is usually a mixture of various oils with either polyurethane, spa varnish or polymerised stand oils. Used expressly as a finish.

    Teak Oil on the other hand was originally used for upkeep of furniture, especially teak. This may have changed in the past 20 or so years to become a finishing oil but I think it is still more along the lines of an upkeep oil.

    However I could be completely wrong on this one as I really have very little to do with oils of any sort. I just remember some 35 years ago being told to oil our teak sideboard, lounge chairs and dining table, etc. regularly with Teak Oil. I think from memory it was a Wattyl product.

    Cheers - Neil

  4. #4
    Join Date
    Jan 2003
    Location
    Osaka
    Posts
    346
    Post Thanks / Like

    Default

    Thanks. So teak oil is a bit "lighter" then?

    I bought some Cabot's Danish oil, just to have, then I thought, "gee I wonder how this'd go on that old teak coffee table..." So tried a leg. Was just wondering if perhaps the teak oil would be better, 'cause, err..., its teak.

    Wattyl recommends using a flat poly finish before oiling (either danish or teak), however I am just using straight oil as per Cabot's blurb. Seems to be working quite well. I might actually do it as per Wattyl's instructions when I make something new and see how that goes.

    Anyone tried this?

  5. #5
    Join Date
    Jun 2001
    Location
    Duffy ACT
    Posts
    15
    Post Thanks / Like

    Default

    Where does this lot compare with Triton Oil? (I like the smell, but is it any good?)

    Johhno2
    Growing old disgracefully...

  6. #6
    Join Date
    Apr 2000
    Location
    Geelong South
    Age
    75
    Posts
    402
    Post Thanks / Like

    Default

    Rebadged Organoil.

  7. #7
    Join Date
    Jun 1999
    Posts
    45
    Post Thanks / Like

    Default

    Neil,
    I agree with you in regard to the Danish and Teak Oils.
    The Danish Oils, was a drying oil that produced a thin coating , while the Teak Oil, was a polish that contain a dye colorant and solvents, it never dried.
    It appears now, that if you add any drying oil to a solvent, a touch of colorant, and called it any name that sounds interesting, you sell it.

  8. #8
    Join Date
    Jun 2003
    Age
    49
    Posts
    51
    Post Thanks / Like

    Default

    Nowadays I think here is little difference between the two - Danish Oil and Scandanavian Teak Oil.

    And always if you try something different to the norm with a particular finish - test it on a piece of scrap timber first. This tip comes free from my experience!
    Do or do not.....

    Just try on a piece of scrap timber first.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •