Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2004
    Location
    SA
    Posts
    170
    Post Thanks / Like

    Default Red Oil with U Beaut finish?

    Hi all

    The intarsia I am currently making has some redgum pieces I would like to darken with Red Oil. Has anyone used Red Oil with a Traditional Wax finish? Are they compatible? Could I use EEE, Red Oil then Traditional Wax for finishing?

    Cheers
    Tikki

  2. #2
    Join Date
    Apr 2003
    Location
    Tolmie - Victoria
    Age
    69
    Posts
    1,058
    Post Thanks / Like

    Default

    Tikki

    I have used Organoil under UBeaut Traditional Wax. You just have to give the oil quite some time to dry (days). It darkened the redgum for me.

    I normally give it a light coat of shellac first to raise the grain, sand it smooth and then apply the oil. Leaving the oiled piece in the sun for 30 minutes tends to give a good finish. I have been told there is a reaction in the oil that is accelerated by ultra violet light.
    - Wood Borer

  3. #3
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    75
    Posts
    9,672
    Post Thanks / Like

    Default

    Don't use EEE first as it may exclude the oil from the timber. Can't say I know anything about red oil but so long as it is perfectly dry there is no reason why you can't use Traditional over the top even EEE if you wish.

    Cheers - Neil

  4. #4
    Join Date
    Aug 2004
    Location
    SA
    Posts
    170
    Post Thanks / Like

    Default

    Thanks for your replies Rob and Neil ... I will do some sample pieces with Red Oil and Organoil finished with Trad Wax to compare the colours.

    Thanks again
    Tikki

Similar Threads

  1. Oil Change
    By bennylaird in forum JOKES
    Replies: 14
    Last Post: 1st February 2006, 09:11 AM
  2. Tung oil finish help needed
    By Firewalker in forum FINISHING
    Replies: 7
    Last Post: 10th November 2005, 11:19 PM
  3. Finish to dining table - tung oil?
    By Mario G in forum FINISHING
    Replies: 4
    Last Post: 21st May 2003, 11:58 PM
  4. Oil change
    By Iain in forum JOKES
    Replies: 1
    Last Post: 1st November 2001, 06:56 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •