Carbatec ts-10L manual

[Seadonkey]

Hi all!
First post, new woody.
I have just purchased a 2nd hand Carbatec ts-10L table saw and was wondering if anyone new of any online manuals floating around the internet. Or if you have a manual could you photograph it for me.
Just want to set the saw up and adjust it using the original instructions as I am not sure what the previous owner has done and I am not familiar with it.
Cheers

[Midnight Man]

Welcome to the forums

A little Google-Fu turns up this...

This link: I was able to grab a bargain and upgrade... - Wood Working With Wayne | Facebook says your saw is the same as a Grizzly 6091 and a Jet JTSA10L Xacta).

Knowing these US manufacturers are pretty good with keeping manuals, it didn't take too long to track this down: https://content.jettools.com/assets/...674_man_EN.pdf

Hope this helps!

[Seadonkey]

Thanks Midnight Man! You sir are a legend 🤙🏼

[Midnight Man]

Thanks Midnight Man! You sir are a legend ����

Happy to help - I take it the two saws are actually the same effectively, and the manual is applicable? (I was a bit worried, basing it off a single Facebook post!)

[Seadonkey]

Close enough to help me out👍🏼

[old1955]

Welcome to the forum.

[Seadonkey]

Thanks mate.