



Results 1 to 15 of 17
-
24th July 2018, 11:12 PM #1
Howard butcher block alternatives
Hi all,
Just wondering if there are any alternatives to Howard butcher block conditioner that I can get in Sydney?
Thanks heaps.
-
24th July 2018, 11:55 PM #2
Try our benevolent dictators product, Foodsafe Plus.
-
24th July 2018, 11:58 PM #3
Does it contain beeswax?
-
25th July 2018, 12:03 AM #4
Even though I use it for chopping/cutting boards I do not know with any certainty. But I don't think so as the finish is not too waxy.
-
25th July 2018, 12:18 AM #5
Thanks cava.. I’ve just installed a laundry wooden countertop and planning on using paraffin oil and topped with something similar to the Howard conditioner which will give it extra protection. Hoping to get something that’s readily available locally.
-
25th July 2018, 10:11 PM #6
Not sure if this is actually what your after but I found Ikea have mineral oil a lot cheaper than i've found anywhere else.
-
25th July 2018, 10:43 PM #7
How about U-Beaut Traditional wax. Also food safe. U-Beaut Polishes - TRADITIONAL WAX Polish
-
26th July 2018, 12:51 AM #8
Are you referring to this?
SKYDD Wood treatment oil, indoor use - IKEA
-
26th July 2018, 12:55 AM #9
-
26th July 2018, 09:44 AM #10
You could make your own. I make my own conditioner out of beeswax wax, mineral oil and orange oil. I have a wooden countertop that I apply it to regularly with good results. I plan on adding carnauba wax to the mix which will give a harder wearing finish. I use it on my cutting boards and even in the workshop on some tools.
-
26th July 2018, 06:16 PM #11
-
26th July 2018, 06:45 PM #12
-
26th July 2018, 09:18 PM #13
-
26th July 2018, 10:28 PM #14
I’ve made quite a few different batches. I find 1 part beeswax to 4 parts mineral oil to be a bit too hard. It’s fine if you’re applying it to a small surface area like a small cutting board, but I like it to be easier to apply. So I tried 1 part beeswax to 5 parts mineral oil and that’s my go to ratio. I can easily scoop it out of the container and it’s easy to apply.
I then got some food grade orange oil and mixed 1/3 mineral oil, 1/3 beeswax and 1/3 orange oil. This consistently goes on easily and is my favourite. I bought around 60 of those 150gram containers and just write the ratios on top.
I got a 1KG block of medical grade beeswax for about $55 and use the mineral oil from ikea. I know you can get it cheaper than this if you do some research. This way you can make up and experiment with different ratio and see what works for you.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 , 0
izzy_a thanked for this post
-
26th July 2018, 10:38 PM #15
Similar Threads
-
Howard butcher block alternatives
By izzy_a in forum FINISHINGReplies: 0Last Post: 24th July 2018, 11:03 PM -
Urethane Gel for Butcher Block
By Eli in forum FINISHINGReplies: 19Last Post: 2nd December 2007, 07:57 AM
Bookmarks