Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Ribbon Plate
-
5th August 2005, 11:11 AM #1
Senior Member
- Join Date
- Mar 2005
- Location
- Melbourne
- Posts
- 135
- Post Thanks / Like
Ribbon Plate
My house plans show a second top plate on both floors. I believe this is called a ribbon plate. Is this correct and if so, what is its purpose? Thanks.
-
5th August 2005, 11:28 AM #2
SENIOR MEMBER
- Join Date
- Aug 2003
- Location
- Pambula
- Age
- 59
- Posts
- 5,026
- Post Thanks / Like
The ribbon plate is required if your trusses will not sit directly over a stud. It's just to make the carpenter's life easier so that he doesn't have to worry about lining things up. which sometimes is not possible depending on the roof design and what's underneath.
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
13th August 2005, 08:00 PM #3
SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Victoria
- Posts
- 412
- Post Thanks / Like
Metung,what is your ground floor ceiling/first floor floor made of?Are you using posi struts or similar?
Tools
-
18th August 2005, 06:41 PM #4
Senior Member
- Join Date
- Mar 2005
- Location
- Melbourne
- Posts
- 135
- Post Thanks / Like
Sorry for the delay responding, the project has finally started and I was down "supervising" the excavation for the slab.
The first floor is 240mm deep HYBEAM with 35x70mm ceiling battens at 450mm crs.
Reply With Quote
Bookmarks