Dust collection

[ydna001]

Hi all. Just completed the full installation of a CV1800 cyclone and 150 mm ducting. Yet to make hoods for my lathe and my dewalt sliding compound saw, if you can help me out with some plans that would be appreciated. I have my tablesaw and thicknesser hooked up and the extraction is superb, when I learn how to post photos I'll put some on. To those considering a quality cyclone in your shop I can highly recommend this one, however I found the purchasing experience slow and painfully incompetent from the only stockist in our great country.

[Evanism]

Congratulations. there are many here who would love one, myself included. Any pix are welcome

[BobL]

Hi all. Just completed the full installation of a CV1800 cyclone and 150 mm ducting. Yet to make hoods for my lathe and my dewalt sliding compound saw, if you can help me out with some plans that would be appreciated. I have my tablesaw and thicknesser hooked up and the extraction is superb, when I learn how to post photos I'll put some on. To those considering a quality cyclone in your shop I can highly recommend this one, however I found the purchasing experience slow and painfully incompetent from the only stockist in our great country.

There are plenty of hoods described in this forum so start searching.