finishing a chopping board
hello long time reader whos decided to finally get involved in the forums, in my spare time ive been making a long grain chopping board out of off cut blackwood ive had lieing around, after completing the board its now time to finish it.
after a trip to bunnings i was told to use danish oil and a coat of beeswax, long story short the board came up a treat after 3 coats of danish oil and beeswax but after testing some small water drops on the back it looks like the finish will be ruined by water. after wiping the drops off a light mark of where the water was is visible, easily fixed with some steel wool but i dont want to re waxing it every use.
my question is, have i used a suitable finish or is finish i mentioned only good for furniture intended to stay dry? and if i need to change to a better finish will i need to sand the oil out of the board or is it ok to apply another finish over it? thanks in advance, stefan