Printable View
hi all 1st timer here but i need some advise on laying foundations.soil is reactive and stumps have to be 1.0m down with 450mm above.the house i want to build is 15m x 8.4m i was wondering what price i would be looking at roughly to get tradies or if i should attempt it myself as budget is beyond tight lol.i want 1.2 m between posts.hope someone can help getting started is daunting.:oo::oo:
Nothing to see here bitingmidge...move along :wink:
Hi
I reckon you have left out about four paragraphs of info for you to get reasonably accurate advice.
What sort of footings? Brick, timber, steel?
What do the plans say?
How hard is the ground? Can a one man posthole auger work or does it need a machine (bobcat excavator). 1m down is an easy job for most machines unless there is rock.
Can you do the layout? Can you lay bricks? Is 1.2m spacings correct?
If you are owner building IMO you need to seperate what YOU can do and what you need to outsource to the professionals. For me I would need the surveyor to mark out my boundaries but would be happy digging the holes and setting posts but wouldnt try bricklaying if that was what was needed.
Heaps of info needed but I am sure someone will have the answer :).
cheers
dazzler
1 metre down!!!!!
Luxury !!
(cue monthy python skit )
I found that it was worth getting someone around to get the levels rights and peg where the stumps have to go.
dont forget about treating those stumps for termites, being in Whichy there would be alot around
thanks dazzler & bugsy.im just working this all out so i know im going to need lots of help.im going to use treated pine stumps ,the soil is clay,aust standards said 1.2m was fine i could go 1.8m but to much bounce. the house will be clad in hardiplank with tin roof.i was going to use a hole auger but i think this stage may have to be done by the pros just a bit scared about getting ripped off as that would kill the project.dose anyone have a rough idea of what i should be paying to get it set out and stumps done by a tradie.im not going to be put off by how hard this is as this is my only way of getting out of poverty for good.:doh:
$4 per post hole if you have someone in your area with an auger, add travel time if not.
With you on this one Brickie,
Recently had to put in 6 Fence Posts in a Paddock.
I was
Working out the costs,
in Dollars
and Time
and Wear-and-Tear on me;
if I did them my self, over a few days/week.
Day Later found out about a local Fencer who had an Auger and hydraulic ram mounted on the back of a Tractor.
Got the 6 x 8-10 Inch Hardwood posts 900mm in the ground,
and 5 Foot High,
All done in 2-3 Hours.
He placed them within 2 inches of the Survey Pegs without Moving those Pegs:cool:
All up for EVERYTHING $152.oo:oo::D:D
Me Thinks :2tsup:
are you getting a permit?Quote:
Originally Posted by bingoshelley
I have a funny feeling you are not and you dont have any plans do you?
I dont know if you can use treated pine stumps, but if they are on your plans then it must be ok:;
put the stumps in at 1.8 and use larger bearers/joists to eliminate bounce
Ouch,Quote:
Originally Posted by bugsy
Big Call Bugsy:o
BUT
MUCH Bigger troubles down the line for Bingoshelley
if you are Correct:doh:
thanks guys im definately getting a building permit and i havnt had any plans drawn up yet still waiting on them so will the plans tell me what materials to use for the stumps?my god this is definately going to be the house that jack built.does anyone want to buy it as i was intending on selling it 6mths after building it.lol:U:U:U
Hmmm, Wycheproof, owner builder, no experience,.....Ill get back to you......:DQuote:
Originally Posted by bingoshelley
lol brikie might be 10 years before i finish this one lol:)
your plans will tell you everythingQuote:
Originally Posted by bingoshelley
to get a realistic quote from Tradies , they need to know what they are building
small steps , get your plans done and most probably the council will need it for a permit anyways
goodluck:2tsup:
try not to get too stressed out, its only money
thanks guys despite all the negatives and the total lack of knowledge im still looking forward to building it i just brought the csiro book for owner builders but im sure ill be asking lots more silly questions from you guys and who knows one day i may even finish it lol
Bingo.......given where you are and the soils you'll be playing with plus the relatively small size of your building then I would look seriously at auger style stumps.
They basically look like post hole augers and are indeed fitted by a drill rig. For example www.instant.com.au www.steelfoundations.com.au
An alternative stump is Koppers treated timber building poles www.koppers.com.au
I'd be guessing but I'd reckon you'd probably get away with just twelve stumps at six metre spacings across the width and three metre spacings on the length. Bearers could be steel I-beam or Hyspan while joists would be Hyjoist slung between the bearers...
1.2m spacings for tiny timber stumps is totally impractical.......I just did 1.5m spacings on my stumps for an extension and even that was a little too close for practical sanity.....forever knocking soil back in the holes for starters and you'll need hundreds of the buggers!! At 1.2m, a Bobcat (and even a Dingo) will struggle to drill a hole without filling in its neighbours...
ok thx ill check them out:U:U:U
Hi bingoshelley, hows the house coming along? If it's still happening, why do you intend on selling in 6 months.Quote:
Originally Posted by bingoshelley
I don't want to sound like a know-it-all, but if you are intending on building your own house with little building experience, you may want o do a bit more homework.
Iv'e almost completed mine, and all I can say is that it's a lot bigger job than most people think. Don't want to put you off, Iv'e really enjoyed doing it and can honestly look back and say that I wouldn't have done anything different. (Well, maybe 1 or 2 little things, Ha Ha.)
I was also fortunate that I have my own business and was able to take time of to do it. I couldn't imagine trying to build your own house whilst having a job at the same time. Take forever....
I'd also had a little experience by helping a builder mate do a couple of houses years ago. By paying attention then I was confident in doing my own. Most need a little more than a book.
Best of luck if its still on and I'm sure you'll get plenty of help and advise through the forum as I did....
PS: I used 100x100 Cypress Pine for my stumps rather than Treated..
:2tsup::2tsup::2tsup: