Printable View
Hi
I have never puchased a lawnmower before so I am wanting some information.
I have a buffalo lawn and some people tell me to get a reel mower whilst others have suggested a rotary mower.
What is better, I have approx 60m2 of lawn out the front and am planning on laying lawn out the back some stage soon as well.
What brands etc, I have heard that Victa / Honda are good.
Any suggestions, help/advice would be greatly appreciated.
Many thanks
You can't go past a honda 4 stroke.
IMHO If you have never bought a mower before and you get one of these, you will never have to buy another one. :2tsup:
yep.. the 5.5 horse Honda is great.. I have one on a masport utility, can't beat it. No catcher but thats a big :2tsup: in my book.Quote:
Originally Posted by Geoff Dean
I have a Honda (4Stroke) after having a 2 stoke for many years
I would replace the Honda instantly with same, I use it as a mulch mower, and dont put out grass clippings any more:D:D
Used to loath Briggs and Stratton motors. But my brother gave me his old 4 stroke mower - not working, dead as a door nail. Pulled carb apart, cleaned all the gunk and corrosion out, put in a new plug, threw it all back together, (almost literally :wink: ) put some fuel in, and it fired up first pull :2tsup:
Seems they've come a fair way. :)
I bought a mulching mower a couple of years ago and it's great.
I loath using catchers, and my previous mower I'd never use it's catcher, but it always left a trail.
The mulcher has a plug to go in the back, and literally the grass vanishes real quickly as it gets chopped so fine.
FWIW, mine's a Victa 5HP B&S mower.
Oh yeah whatever brand you get, get a 4 stroke, much better than mucking about with oil in the fuel.
I changed over to a Rover B&S 5HP mulcher from an very old Victa 2 stroke last year. Definitely go with a 4stroke, apart from anything else there was an item on TV last week that said the emissions from a 2 vs 4 is like 10 to 1.
Things to watch.
1) you shouldn't lay a 4 stroke on it's side to work on the blades, apparently does bad things with oil leaking in the wrong places.
2) I'm not sure about the mulching thing. Due to the drought and slope of our site the grass is getting a bit ratty. The mulching mower seems to vacuum up the dirt between the grass tufts and spread it around in big clouds, probably making the grass even rattier. If used without catcher and without the mulching plug in place the body fills up with cuttings pretty quick.
3) The 5HP has plenty of power to mulch up a big pile of debris, thats not the same thing as mulching the lawn clippings while you mow....
4) The 5HP is pretty heavy. I've got a small grassed ramp with a 90 degree turn in it and the mower is a bit too heavy to manoeuvre easily on the slope.
5) You can't walk the Rover up steps. The rear wheels on the old Victa were positioned much further behind the body, allowing the wheels to 'climb' when pulled backwards up the steps. The new Rover's back wheels don't protrude enough behind the body and I have to lift it over steps.
It is my understanding that 2-stroke engines have been/are being banned in the US, certainly in outboard engines, for this very reason.Quote:
Originally Posted by Fuzzie
We bought a 5hp MTD 4 stroke some years ago and decided to go for the self-propelled. Best decision we ever made, as SWMBO does all the mowing:D.Quote:
Originally Posted by Fuzzie
Should have opted for the electric start as well, because I'm the silly mug that has to start it first off:(
I have a rover with a 4.5hp suzuki (2 stroke) engine and 4 blades. Powers through thick grass. And starts rather easily. The bloke we got it off reckons tilt it up on its side to the left for about 5 seconds then throttle to choke and it starts first go.
Jim's?
DON'T BUY VICTA 2-STROKE!
Their newer mowers have a totally useless automatic carburettor/throttle ... it revs up and down which makes for a most annoying sound, and bogs down at the slightest hint of long/wet grass.
I deeply regret not spending the extra (OK, double) money and buying a Honda.
I would buy a four stroke, !st on the list would be a Honda.
Buy a Honda self-propelled mower and a Honda 4 stroke trimmer. This will hurt your wallet but will pay in the long run. The main problem with mowers and trimmers is that they sit around a lot doing nothing (like some of the people who write on this forum).:wink: Then the fuel turns sour and somehow gets water in it, and you have to pull the cord 15 times and then it floods.
Honda's can handle this sour fuel because they're so well made and will tend to start first or second pull despite it. The rest of the mowers are mainly alloy frames that they throw a badge on and a Briggs and Stratton motor in. They go all right, and they tend to do the job, but every now and then you have to fiddle with them and hit and kick them and take the plug out and smell it and then wait three hours for the flooding to evaporate. Apart from that they're great.
Biggest problem with a Honda 4 stroke trimmer is the weight penalty...
Another vote for the Honda. I've had a 21" cut self-propelled mower for 15 years and it is just brilliant. I used to have a big lawn and it just ate it up. Very easy to start. My 12 year olds can start it.
Whatever you do buy a 4 stroke! I have a 4-stroke Briggs and Straton mulch and mow and it's never let me down. Stay with the two strokes for your brush cutter/whipper snipper that's a great application for them.
Ciao,
M.
I bought a Toro self drive 4 stroke a big machine but it is guaranteed to start on the first or second pull or they will fix it so it does. It has three choices a rear catcher a side exit or a mulch. I use the mulcher all the time. Best thing outside of a woodworking machine I have bought:2tsup::2tsup:
les
Many thanks for the replies guys.....the only thing is, no-one really mentioned ree (Cylinder) mowers compared to rotary mowers. Does anyone have advice on what type to get?
Which is better for a soft leaf buffalo lawn?
Thanks
I had a cylinder mower it cut only good lawn not grass. If you want a bowling green finish go for it. The one I had a BS motor auto adjust speed of cutting heavy grass. It worked for a time then it became US. I would never buy one of those again:(
les
One piece of free advice.
DON'T BUY A TALON 4 STROKE!!!
I did, from a place that rhymes with Runnings - what a load of CR%P. Breaks down, can't get spare parts!
I went to get a spark plug from the very place i bought it from, and the bloke laughed and said "no, don't have them. that's what you get for buying a GMC!". "Well", i said. "It's NOT a GMC, it's Talon, and I bought it here". No more smiles then. Even the blokes that work at that establishment don't like them.
Save your bikkies and buy a decent mower - I'm going to.
Thanks Guys
I have looked at the Hondas as you mentioed however they are very pricey......what about Victa, ROver etc, I know someone has already said in a previous post that Rovers are good.
Also (its funny when you ask a few guys at work) what would you recommend to do the edges.
One guy I know uses shears, my boss uses a wipper snipper, my father-in-law reckons you can't go passed an edger?
Any thoughts?
The mower I fixed is a Masport with a Briggs & Stratton motor, dad bought a Rover with a Briggs & Stratton motor. Like I said, they are much better than they used to be. Not a Honda, but not a Honda price, either.
I have a Kawasaki brush cutter for the trimmings, and also a Ryobi (also courtesy of my brother). Haven't used the Ryobi yet, but it is just a line trimmer - smaller and lighter than the Kawasaki. Will probably end up using it a bit more because of it's lightness.
Arry, had a Jim's franchise for 5 years in a previous job.
As mentioned already, Honda make some of the best engines and mowers, and I'd not hesitate to recommend the same, if you can afford it - they are expensive, but quality doesn't come cheap.
Masport and Rover make pretty mowers too, often with briggs engines though.
Briggs engines aren't in the same league as Hondas IMO, but will still give good service provided you maintain them well, ie. change the oil reguarly, clean the air filter, use fresh fuel, etc. Their higher end overhead valve motors are much better than their cheaper units though.
Four stroke motors are relatively heavier and have more moving parts than two strokes, but are much more fuel efficient, cleaner running, quieter, longer lasting - it's no contest for a lawnmower motor I reckon - 4 stroke is definitely the way to go.
Victa mowers are an institution but the quality just isn't there unless you buy towards the top of their range
When buying a mower, a couple of points - aluminium decks are better IMO as they don't rust like steel, but do wear quicker over the long term. Larger wheels are easier to push than smaller ones, ball bearing wheels are better than bushed for the same reason. The ability to fit 4 blades (instead of just two) is better for cutting lush wet grass. Swing-back mower blades are easier to maintain that a solid bar blade, and cheaper to replace.
Price is generally a good indicator of quality.
How you maintain the edges depends a bit on how often you are prepared to do them. It is easier and neater to maintain the edges than to let them overgrow and have to heavily cut them back.
Using some sort of powered machine is definitely easier than doing them by hand
If you do the edges every time you mow, just maintain them with a whippersnipper the same as virtually all contractors. This takes practice to do them neatly but it will come. The whippersnipper is also used to trim around garden beds, trees, etc.
On the other hand, you may prefer a powered blade edger for example the Atom model here. My father in law has one and loves it, and it is probably easier for a novice to produce nice neat edges along a path with one compared to a whippersnipper. A lot more expensive, though, and less versatile. There are other cheaper powered blade type edgers around too.
I think you would be best going to different mower shops to research & see what your money will buy and set a budget. Look at features that your money will buy, and see which ones are more relevant to you.
If you will need your mower, edger, etc serviced by someone other than yourself, take into account the quality of service that you receive at each place you visit.
Good luck............cheers..............Sean
Many thanks for your responses, especially Sean as you obviously put a bit of time into responding?
Now I just need to make a choice :-)
i have had an old victa toe choper. the kind that puts you in the victa word of the hospital.
but now have 2 mastport mowers with 4hp briggs and straton motors on them and would never go back 4 stroke is so quiet and clean. get one with a B&S mottor nim not so sure on honda.
I was in the same boat a while ago.
Was going to get the Honda Mulcher mower for $720ish, but ended up getting the Masport 4in1 Genius mower. It's got a 6HP B&S, 8" Mags :rolleyes: with proper bearings, it mulches, chips and catches. Main reason I picked it over the Honda was the extra features and the adjustable handle. I'm tall and the missus is short, and the standard height handles on normal mowers me off to no end.
It starts first pull, has heaps of balls (but enjoys drinking lots) and even tho it weighs 37ish KG, it is super easy to wheel around. It cost $750 which is more than the Honda. I super happy with it, although sometimes think I should have went with the Honda instead at the price range.
ArryQuote:
Originally Posted by Arry
don't get carried away, you only have to mow 60sq.m — that's about twice what I mow in about 5 minutes with an old electric flymo.
It takes longer to get the mower out and put it away than it does to cut the grass!
ian