Hi all
Me again, a little question - what minimium height do I need from floor to bench for a dishwasher ?
Celeste
Printable View
Hi all
Me again, a little question - what minimium height do I need from floor to bench for a dishwasher ?
Celeste
All modern benches are 900mm tall, so the DWers are made for this height.Quote:
Originally Posted by celeste
Al :)
Less the thickness of the benchtop of course - nominally 34mm...
Cheers guys!
Ah Celeste, my little Chickadee, have a dekko at this and all will be clear:
http://www.fisherpaykel.com.au/globa...4§ion=spec
Hi AlQuote:
Originally Posted by ozwinner
Yes they :2tsup: are but my problem is I am not using the adjustable legs and kick boards which are 160mm (IKEA cabinets). I am using a base frame of 120mm and then adding 19mm bamboo floor. Making the base the cabinets sit on only 100mm. the cabinets are 700mm = 800mm + bench 30mm
So, I need to work out wether I need to bunk up the base frames to allow for the dishwasher.
I am thinking I need another 50mm at least - I am thinking I need a bigger base?
In the old days the kick boards were 100mm - I wonder why they changed to 140 -160mm ?:? Does it make the cabinets cheaper to make:?
I am thinking I need a trip to bunnings :rolleyes:
celeste
Quote:
Originally Posted by celeste
most dishwashers are 840mm high with adjustable feet to take them up to 870mm high ,in my own kitchen i made a platform up so that the washer would be flush with the doors beside and used a higher kickboard in the washer cavity to hide the platform :2tsup:
we had our kitchen installed and the floor was a bit out, the dishwasher just fits under the bench top with all the adjustment as the lowest point the trouble is, we now need to put some new flooring down so don't know how i am going to get round this one.thinking i can take the adjustable legs out and turn them down which would give me 10 mm or so but it's going to be tight, just wished i'd asked for higher bench tops.davo
Hi all
Thanks Guys
I thinked and thinked and I decided to ditch the 120mm (not really - put aside for another day) and nipped down to mitre 10 and purchased 2400 x 1200 x 16mm MDF then asked them to cut it into 1200 x 180 length $45.00, I pick them up tomorrow. Good thing, I've nearly finished putting all the cabinets together.
This will give me 180 + 700 - 20 = 860mm clearance under the bench. I will glue on some aliminium look laminate - excellant.
Photo's coming soon:2tsup:
Celeste
Celeste
who made/makes your diswasher?
Miele's for example, are 817 to 870mm high (depending on how far the feet are extended)
hope that MDF is moisture resistantQuote:
nipped down to mitre 10 and purchased 2400 x 1200 x 16mm MDF then asked them to cut it into 1200 x 180 length $45.00, I pick them up tomorrow
ian
I think it should be fine, it will be sitting on structure board, faced with laminex and the bamboo will cover 20mm of the bottom of it.:)Quote:
Originally Posted by ian
Celeste
Quote:
Originally Posted by ozwinner
As a cabinetmaker, Ifind that this is usually about average but not for "ALL". If you were 7 feet tall, you'd want slightly higher benches but then one day someone else may own/live in your house and they might be 5 feet tall like my wife - do you compromise?
I'm going to make the bench that my sink is on between 800-850mm.
Quote:
dishwasher clearance
Here I was hoping that dishwashers were going cheap.
this hieght will no doubt be sufficient for your situation at the moment but not acceptable to the bulk of home buyers in the future ,you will effectively cut at least 75 percent of the market out if you ever decide to sell up and move ,i am not criticizing you in any way shape or form but in my honest opinion the height is way to low by todays standards :no:Quote:
Originally Posted by Just George
Quote:
Originally Posted by Just George
On a slope?
Al :?
Quote:
Originally Posted by ozwinner
Al,
he's a cabinetmaker, he built his cabinets straight, it's just that the bastard chippie who did the floor and subfloor got it all wrong.:D
Of course, the chippie blamed the mongrel bricklayer who built the piers without using a level of any kind.:wink:
Mick
Wasat?Quote:
Originally Posted by journeyman Mick
Al :?
Hi guys
Well, I picked up the MDF, I had Mitre10 slice it up into 180mm x 1200 lengths for me, I do not think much of thier cutting, lucky its only a frame and not for a bookcase etc.
Knocked up all the frames, glued on an alimimium look laminate, popped in place, levelled up etc. and I have 1/2 the cabinets installed.
Took a little longer as one lot of cupboards needed holes etc for wiring - dishwasher / oven / hotplate / cut off switch and I have installed the cabinets with the fancy carousel thingys so I needed to install them to check there would be no problems with wiring. All the others are straight install yipee ! and I have so many IKEA boxes it takes time to find all the ones I need.
I must admit (I am learning all the time) that the electrician could have organised the power better, I have wiring running through a 1200 long cabinet into the oven cabinet, if he had put it further down the wall I could have run it throught the base frame. :doh: Also, one of the wall switches is so crooked and I cannot get it out to straighten it up, Hubby couldn't either.:doh:
I ran out of time forgot the photos, I will try for sunday.
Have a good weekend.
Celeste