Flat free wheel barrow wheels

I'm so tempted to get one of these.

I don't go through a lot of wheelbarrows. I'm on my second. The pneumatic tyres that both had gave up the ghost. I replaced the inner tube on the first but it didn't last long. And now it's happened on my latest barrow. This time the actual tyre has a tear.

An uncle of mine used to have a barrow with a solid steel wheel. It was a noisy thing on concrete and it marked the footpath, but there was no chance of it going flat. I recall also seeing a similar wheel to the sold steel but it had strip of rubber around the circumference. I don't know how it was held in place, but it looked like a compromise. And if it did wear and come off you still had the steel wheel that would last.

I sometimes see people selling them for garden ornaments. And they often want mega bucks for them. It was that idea that made me think of a solid rubber tyre. Though, they're not cheap. Bunnings sells them for close to $100. You can buy a new wheelbarrow for less than that.

I'd consider making a steel wheel but I just know I'd be wasting my time.

Some people have tried drilling holes in the tyre and pumping expanding foam from one of those aerosol cans into them. They claim some success. Has anyone tried that?

-= Hidden Content =-

-= Hidden Content =-

-= Hidden Content =-

-= Hidden Content =-

-= Hidden Content =-

-= Hidden Content =-

-= Hidden Content =-

-= Hidden Content =-

-= Hidden Content =-

-= Hidden Content =-

-= Hidden Content =-

this post DOESN"T require you to read the content.


spam aside.

I garuntee the first time to try and push the barrow up and over something with a solid metal wheel and it chips the concrete, marks the timber etc and the ton of extra weight and lack of grip you'll run back to bunnings for a normal tyre.

if they worked people would still use them

"Thanks requirement" stopped at post 13

Quote:

---

Originally Posted by havabeer69

solid metal wheel and it chips the concrete

---

No doubt. The last steel wheeled barrow I saw did a nice job of putting lines on the cement driveway. That's probably why the newer ones came out rubber coated. I'd love to have one. The only negative I can think of (besides taking chips out of kerbing) is that they'd probably easily sink into sand or mud. Though, to protect kerbs you could probably turn around and pull the barrow up, backwards. Oh, and they'd be noisy compared to rubber.

I've been reading a few posts on solid rubber wheels. An American forum. There's a common theme that they handle differently from pneumatic tyres. Surprising, I know. We're not referring to high powered sports cars, but that's what they say. I'll have to take their word on that.

So, I guess no one on this forum has used a solid rubber wheel on a wheelbarrow, and can tell of their experience of how good/bad they are or brands to get/avoid and the like.

I wonder if they make a solid flex tyre like they do for Skid Steers

https://images.app.goo.gl/RzGBiVD4ZYAT2AJDA

Interestingly designed tyre on that link. It probably prevents wear on shallow turns on those skid steer machines.

A pneumatic tyre can be quite hard under a lot of air pressure. So, I have no idea how hard the rubber is in these 'no flat' tyres. This strange handling some complain about may be becuase they are soft. Perhaps, rather than being solid rubber, they may actually be a regular tyre that has been filled with something. Foam, maybe.

No personal experience but Sherlock make a solid flat free wheel for their wheelbarrows.https://www.bunnings.com.au/sherlock...yres-tubes.htm

I can't believe anyone would think a solid cast iron wheel barrow wheel is going to be cheaper then a solid/pneumatic one?



hell just go get a 2nd barrow for $20 and throw the tub out if you don't want new. there are also alot of other places to buy tyres compared to bunnings

https://www.supercheapauto.com.au/p/...ow/340466.html - $30
https://www.amazon.com.au/Wheelbarro...A1UZ5O7SRZGFSM - $25
https://www.totaltools.com.au/207685...bucket-dcu602z - $7699

I don't think steel wheels are available any more. I doubt cast iron was ever available for wheelbarrows. Prices of old barras with steel wheels vary from about $20 to $200, and the sellers generally push the notion of them only being good as a garden decoration.

The links you provided HB were all pneumatic tyres, which is not really what I'm after. I already have a couple of them that are only good for the bin. The last one was weird. Had to laugh. I think I could find better things to do with $7699.