How much brainpower would it take?

I've just been to Bunnings. I'm in Victoria where we have stage 3 lockdown so only 4 people allowed per aisle.

I wanted to buy two bolts. The line to get into the bolt aisle was about 40 people long. I asked the bloke at the front of the line how long he had been waiting - over two hours! You could walk into any other aisle in tat part of the shop with no waiting.

I have a bad back and cannot stand around for one hour let alone two. I asked for staff assistance. Was told that there was no other procedure in place. If I want bolts I have to line up with everyone else. Ok Fair enough. I was only at Bunnings for bolts because Konnekt is not open on Sundays anyway. Their bolt section is carp. There were 3 or 4 staff members supervising the bolt section and the waiting line.

Now here's the thing. It's been like that for months now since social distancing started and will be so for at least another 5.5 weeks in Melbourne anyway. The same aisles have long queues to be one of the lucky four to get in and most of the other aisles are nearly empty. HOw long does this have to go on before they work it out that they could subdivide the busy aisles like nuts and bolts into sub categories and spread them over a few more aisles?

Advantages being people have to spend less time in queues minimising exposure to risk of infection, less people in the store means less cars in the car park, fewer people in close contact with their staff so generally happy staff and customers. Sales would undoubtedly increase as more people would be tempted to go. Disadvantages would be a few staff hours to rearrange stock (which would be regained from the reduction in staff needed to supervise the busy aisles) and a small amount of regular customers being confused because some stock items have been moved from their usual spot.

How much brainpower would it take?:roll:

Don't know if it is close, but I've never seen a queue at bunnings Ringwood
No guarantee of course.

I thought we were in lock down. I don't see where it says we can go out for hardware shopping except for emergency repairs.

I had to stand in line at Home Depot (a.k.a. almost Bunnings in US) for almost 40 minutes to get into the store.

Quote:

---

Originally Posted by rrich

I had to stand in line at Home Depot (a.k.a. almost Bunnings in US) for almost 40 minutes to get into the store.

---

and as a further comment, here in Canada, Home Depot (aka the Big Orange Retail Giant) is also "queue to get in" and the numbers allowed into the store re balanced against the number leaving.

Quote:

---

Originally Posted by Nifty Nev

I thought we were in lock down. I don't see where it says we can go out for hardware shopping except for emergency repairs.

---

True Nev, I don't see where it says that either.

But I can't see where it says that we can't either.

It is certainly not clear and unambiguous.

Quote:

---

Originally Posted by ian

and as a further comment, here in Canada, Home Depot (aka the Big Orange Retail Giant) is also "queue to get in" and the numbers allowed into the store re balanced against the number leaving.

---

Which just reinforces my point - the line outside would be getting longer and longer the more that people are stuck in queues inside to get to the popular items. Not dispersing the popular items so that people can get in and out quickly makes no sense at all. Yet here we are.

I have been to Bunnings on 2 occasions just after 7 on a Sunday morning, once during our previous lockdown - in and out in 15 minutes. Only about 10 cars in the carpark.
Same at local Woolies yesterday.
Certainly the best time to go.

In all their adverts, Bunnings remind us that we may have to queue to limit the number in the store.

Quote:

---

Originally Posted by doug3030

I've just been to Bunnings. I'm in Victoria where we have stage 3 lockdown so only 4 people allowed per aisle.

I wanted to buy two bolts. The line to get into the bolt aisle was about 40 people long. I asked the bloke at the front of the line how long he had been waiting - over two hours! You could walk into any other aisle in tat part of the shop with no waiting.

I have a bad back and cannot stand around for one hour let alone two. I asked for staff assistance. Was told that there was no other procedure in place. If I want bolts I have to line up with everyone else. Ok Fair enough. I was only at Bunnings for bolts because Konnekt is not open on Sundays anyway. Their bolt section is carp. There were 3 or 4 staff members supervising the bolt section and the waiting line.

Now here's the thing. It's been like that for months now since social distancing started and will be so for at least another 5.5 weeks in Melbourne anyway. The same aisles have long queues to be one of the lucky four to get in and most of the other aisles are nearly empty. HOw long does this have to go on before they work it out that they could subdivide the busy aisles like nuts and bolts into sub categories and spread them over a few more aisles?

Advantages being people have to spend less time in queues minimising exposure to risk of infection, less people in the store means less cars in the car park, fewer people in close contact with their staff so generally happy staff and customers. Sales would undoubtedly increase as more people would be tempted to go. Disadvantages would be a few staff hours to rearrange stock (which would be regained from the reduction in staff needed to supervise the busy aisles) and a small amount of regular customers being confused because some stock items have been moved from their usual spot.

How much brainpower would it take?:roll:

---

Have you thought this through?

Would your proposed subdivision be on
fastener size
#1 to #10 in aisle #1
#9 to #14 in aisle #2,
1.6 to 6 mm in aisle #3,
6.5 to 14 mm in aisle #4,
coach bolts in aisle #5,
and so on for imperial sizes


surface coating
galvanised in aisle #1,
stainless in aisle #2,
black bolts in aisle #3,
high tensile in aisle #4,
zinc plated in aisle #5, and so on


besides how many mug punters -- not calling you a "mug punter" -- know the size of the fastener they are after?

how many "mug punters" just wander in with a sample bolt or nut they wish to match? or select the closest match for?



me thinks the "best" solution is to limit the total number of people allowed into the store.

Quote:

---

Originally Posted by doug3030

I've just been to Bunnings.

---

Well, that's your first mistake! Bunnings - 10 acres of goods & nothing to buy (of any quality at least.) They never seem to have the screw, nut or bolt size that I need, and even when it is supposed to be stocked, always seems to be out of stock. The good old corner hardware stores used to keep a great range. Even esoteric stuff - just ask & they would rummage around & find it "out the back". Fortunately we do still have a couple like that around here. Sadly, if I'm doing work for family elsewhere its often the only choice, due to predatory practices putting the little guys out of business. Same issue with Officeworks - acres of office stuff & little real variety. Tried to buy carbon paper - staff looked at each other, shrugged & said "what's that?) :?. At a stationary store for @#$% sake!!)

Quote:

---

Originally Posted by doug3030

True Nev, I don't see where it says that either.

But I can't see where it says that we can't either.

It is certainly not clear and unambiguous.

---

Yes - it is clear & unambiguous. 10 seconds to find & look at the DHHS website:
Department of Health and Human Services Victoria | Restrictions: Metropolitan Melbourne and Mitchell Shire

" If you live in Metropolitan Melbourne and Mitchell Shire you need to Stay at Home.
There are four reasons that you can leave home:

1. Shopping for food or other essential items
2. To provide care giving, for compassionate reasons or to seek medical treatment
3. For exercise (outdoor exercise only, with only one other person or members of your household)
4. Work or study, if you cannot work or study from home

Otherwise, you must stay home. "

Bunnings is hardly "essential items" unless you have some sort of household emergency repair that threatens health or safety.

Its people trying to justify avoiding the rules that has contributed to this second wave & the current VIC lock-down.

Quote:

---

Originally Posted by RossM

Shopping for food or other essential items

---

Define essential.

I am building a knife vise. Two m6 bolts are ESSENTIAL for its completion.

Your definition of essential may be very different from that being used by 99% of the Bunnings customers but I suspect that yours may well be closer to what the Government meant. But without a clear definition form the government who knows?

Quote:

---

Originally Posted by RossM

Well, that's your first mistake!

Quote:

---

Originally Posted by doug3030

I was only at Bunnings for bolts because Konnekt is not open on Sundays anyway. Their bolt section is carp.

---

---

I think I already covered that point adequately.

Quote:

---

Originally Posted by ian

Have you thought this through?

Would your proposed subdivision be on
fastener size
#1 to #10 in aisle #1
#9 to #14 in aisle #2,
1.6 to 6 mm in aisle #3,
6.5 to 14 mm in aisle #4,
coach bolts in aisle #5,
and so on for imperial sizes


surface coating
galvanised in aisle #1,
stainless in aisle #2,
black bolts in aisle #3,
high tensile in aisle #4,
zinc plated in aisle #5, and so on


besides how many mug punters -- not calling you a "mug punter" -- know the size of the fastener they are after?

how many "mug punters" just wander in with a sample bolt or nut they wish to match? or select the closest match for?



me thinks the "best" solution is to limit the total number of people allowed into the store.

---

.
Attachment 476919 .

If I go shopping for essential supplies I will try and do it at a quiet times.
Friday, went to Bunnings at 4:30. In and out in twenty minutes without drama. Only problem was I wanted 2.5mm cord and picked up 3mm by mistake. :( (Probably put in the wrong spot on the shelf as they are next to each other.)
Went back Saturday at 7:30 to swap cord over. Needed to wait for two other customers at exchange counter, otherwise in and out. Then went to work for half an hour. No queue for temperature check. :)

When we first had lockdown I went to a Bunnings about 2 o'clock on the weekend and there was a queue to get in. Like you, I hate queuing. So I went to two other hardware stores (that are actually closer to home) and walked in and out (after paying) with what I wanted. No queue. I understand that not everyone is fortunate to have other stores convenient, but timing can be everything.

Could you log onto their website, while in queue, order for Click and Collect.... it will be brought out to the reserved spots near the entrance?

You gotta hack the machine man!

Wow what is going on down there? I would go into Bunnings on average twice a week and have not had to queue yet except I drove in one Sunday morning and there was a line up so drove out again without stopping.

Quote:

---

Originally Posted by woodPixel

Could you log onto their website, while in queue, order for Click and Collect.... it will be brought out to the reserved spots near the entrance?

You gotta hack the machine man!

---

Thats what I did a few times when we had lockdown here in WA - but you have to know what you want.

Quote:

---

Originally Posted by RossM

Same issue with Officeworks - acres of office stuff & little real variety. Tried to buy carbon paper - staff looked at each other, shrugged & said "what's that?) :?. At a stationary store for @#$% sake!!)

---

it's the quality of the staff Office works et. al. employ
were you trying to buy pencil carbon, Pelikan A4 Handifilm 205 Pencil Carbon Film Blue 100 Pack | Officeworks
or transfer paper X-Press It A4 Transfer Paper White 20 Pack | Officeworks

if you were born after about 1975 (i.e. you're younger than 45), you've probably never seen the stuff used for making "manual photocopies".
We had a similar problem in the Army -- how do you make copies without access to a photo copier?

Bunnings click and collect - not every item is available to use this service. M6 bolts are "Buy in Store". Not available for click and collect (at least not the store I looked at).

Quote:

---

Originally Posted by Handyjack

Bunnings click and collect - not every item is available to use this service. M6 bolts are "Buy in Store". Not available for click and collect (at least not the store I looked at).

---

Well it did give me an excuse to crank up the metal lathe and make a couple of brass ones to see me through until sanity returns. :2tsup:

Brass bolts would probably look nicer in the knife block any way.

Quote:

---

Originally Posted by Handyjack

Brass bolts would probably look nicer in the knife block any way.

---

It's a knife vise, for holding blades under construction. As a working tool subject to various stresses I would rather not leave m6 brass bolts there long term. I went with m6 because they are screwed into threaded inserts and I had some m6 inserts I salvaged out of an old Ikea something-or-other. I figured m6 in steel would be fine for long term, but I don't want to take too much of a chance on the brass holding forever.

I have seen the clarification on ABC. Bunnings is classified as the same as supermarket, stocking essential items. So shopping in bunnings is allowed. Basically shopping for anything is allowed. A concession to Scott Morrison getting the economy going.

Quote:

---

Originally Posted by justonething

I have seen the clarification on ABC. Bunnings is classified as the same as supermarket, stocking essential items. So shopping in bunnings is allowed. Basically shopping for anything is allowed. A concession to Scott Morrison getting the economy going.

---

Well Bunnings is allowed to open under the restrictions - so of course we are allowed to shop there. While I don't regard Bunnings as the brightest organisation ,even they would not open unless customers were allowed in.

Bunnings is #@$&@#@, lockdown or not.

Quote:

---

Originally Posted by ian

it's the quality of the staff Office works et. al. employ
were you trying to buy pencil carbon, Pelikan A4 Handifilm 205 Pencil Carbon Film Blue 100 Pack | Officeworks
or transfer paper X-Press It A4 Transfer Paper White 20 Pack | Officeworks

if you were born after about 1975 (i.e. you're younger than 45), you've probably never seen the stuff used for making "manual photocopies".
We had a similar problem in the Army -- how do you make copies without access to a photo copier?

---

Funny you should mention that, I actually have an almost full 100 sheet box of A4 carbon paper sitting on a shelf behind me. I have used a sheet three times in the last 10-15 years. Carbon paper was also used in typewriters and receipt books, now I am showing my age! :)

Quote:

---

Originally Posted by Ed..

Funny you should mention that, I actually have an almost full 100 sheet box of A4 carbon paper sitting on a shelf behind me. I have used a sheet three times in the last 10-15 years. Carbon paper was also used in typewriters and receipt books, now I am showing my age! :)

---

ah, but ...
is it pencil carbon -- the type that when you use a pen or harder pencil makes a copy on a second sheet,
or typing carbon -- the type that requires an actual type-writer to hit hard enough to transfer the image to second and subsequent sheets (typing carbon is mostly useless if used with a pen or pencil)
receipt / order books typically use self copying paper that requires that you place a stiff sheet between the last sheet of one order/receipt and the next fresh original so that copies do not transfer onto the subsequent copies of the order/receipt -- been there make that mistake more than once.

Also, "commercial bond copy paper" at about 80 g/sq.m is generally too stiff for making more than one legible copy using typing carbon.

And I'm not sure that officeworks et al even stock thinner plain paper.

Just did a small test using mine, it is labeled Columbia Commander, Blue Film Carbon paper and has a drawing of a hand and a pen on the box, the imprint went through 3 sheets of 80 GSM at my normal handwriting pressure, first two sheets were fine, the last started to fade out a bit but still legible, Officeworks sell the Pelican brand of this paper and it's expensive as, they want $190 for a 100 sheet box. Reason I am still keeping this box as it may come in handy when transferring a design on paper to say something I want to cut out in metal or wood. (one day!:D) One thing I did learn was that I need to start writing a few letters, I am loosing the ability to write. Been decades since I last wrote an actual letter, I occasionally fill in forms but that is about it, most of the time I just use a keyboard.:-

Officeworks basically employs anyone who is willing to work for their peanuts. I actually got a offer of a job there about 11 years ago. The advert said "Computer Specialist" so applied and offered the job and was asked when I could start, so I mentioned that a wage has not been stated and they said it was a basic sales assistant wage, and that was about $10 and hour less than I was getting at the time and I didn't really have to even think in my current job. So declined their not so generous offer and walked out, got a letter from them a week later saying that I was not successful in that application. Really!!

So what they really wanted was a specialist with experience straight out of school. Someone please pass a bowl of peanuts to the next applicant. :D

But we digress from the original OP message.

Quote:

---

Originally Posted by Ed..

Just did a small test using mine, it is labeled Columbia Commander, Blue Film Carbon paper and has a drawing of a hand and a pen on the box, the imprint went through 3 sheets of 80 GSM at my normal handwriting pressure, first two sheets were fine, the last started to fade out a bit but still legible, Officeworks sell the Pelican brand of this paper and it's expensive as, they want $190 for a 100 sheet box. Reason I am still keeping this box as it may come in handy when transferring a design on paper to say something I want to cut out in metal or wood. (one day!:D) One thing I did learn was that I need to start writing a few letters, I am loosing the ability to write. Been decades since I last wrote an actual letter, I occasionally fill in forms but that is about it, most of the time I just use a keyboard.:-

Officeworks basically employs anyone who is willing to work for their peanuts. I actually got a offer of a job there about 11 years ago. The advert said "Computer Specialist" so applied and offered the job and was asked when I could start, so I mentioned that a wage has not been stated and they said it was a basic sales assistant wage, and that was about $10 and hour less than I was getting at the time and I didn't really have to even think in my current job. So declined their not so generous offer and walked out, got a letter from them a week later saying that I was not successful in that application. Really!!

So what they really wanted was a specialist with experience straight out of school. Someone please pass a bowl of peanuts to the next applicant. :D

But we digress from the original OP message.

---

My request above was for some carbon paper to use fortransfering adesigns from paper to wood for some pyrography & carving. I would have been happy with either "pencil" or "typing" but NOT at $190 for a small box - GULP :oo: !!