G'day all
I have a tub of EEE-Ultrashine that has gone hard. Am wondering if it can be reconstituted for use. Any help would be much appreciated.
Cheers
Keithg
Printable View
G'day all
I have a tub of EEE-Ultrashine that has gone hard. Am wondering if it can be reconstituted for use. Any help would be much appreciated.
Cheers
Keithg
Put it in a warm spot . . .
Have you tried giving it a good stir?
You can add a small amount of turps but it does degrade it or a short burst in the microwave might work but it is better to chuck it out and get a new one.
G'day ! Is that Pure Turpentine or Mineral Turpentine????
Depends on what grade of hard you are talking about.
If rock hard throw out.
If still in a stiff paste then a really good stir will help and a couple of drops of shellawax no more and a good stir.
DO NOT ADD SHELLAWAX!
If as already stated it's rock hard and crispy crunchy, throw it out.
If it's very thick and hard to use it can be melted in hot water or in the microwave on high with 10 second bursts till it melts. REMOVE LID, don't get it too hot, just melt it till it's runny then add some mineral turpentine and stir with a dowel or icy-pole stick etc (nothing metal) till cools enough to show a thickening wake behind the stick. If you don't do this then the abrasive will drop out of the mix.
If there's half a tub add about 20 - 25% turps.
Hope this helps
Cheers - Neil :U
PS Don't get it so hot that it melts the plastic tub it's in or you won't be too popular. :no:
The Oracle has spoken! Mineral Turps it is! Thanks for clearing that up for us Neil:2tsup:
DAMHIKT remove the cardboard seal from the lid before you nuke it...
Doh! :doh: There's always one isn't there Harry.:rotfl::rotfl:
Remove the lid before melting or it may be blown off by the expanding air pressure or the jar may be blown apart for the same reason. Yucky mess may ensue. Massive explosion aside, how else are you going to see if it's melting or not.
:rofl:
Neil - can the same method (i.e. judicious microwaving) be applied to Trad Wax that has separated out a bit??
Yes. But don't do a Harry. :U
Mmmm...scalding hot wax....:oo:
I prefer to keep my massive explosions in the shed where they belong (peers into petrol tank using lighter to check fuel level.....:D)
Tell us H.... what happens if yer stuff it in the death-ray machine with ALUMINIUM coated cardboard seal still on it. :DQuote:
Originally Posted by Harry72
If life was a comic book ZZZZZZT... :o
it might look like this:
https://www.ubeaut.biz/cover.gif
:zap:
https://www.ubeaut.biz/extinguish.gif
:ohcrap:
No pictures it did not happen. :rotfl:Quote:
Originally Posted by Harry72
I wonder if you were the reason why we have so many red light and speed cameras. :U