G'day all, newbie re termite damage
Gday Everyone,
Im Greg from Bidwill in Western Sydney. Just found your forum and I hope to learn and be of assistance to others here. I have always loved woodworking from highschool days and made much of my own furniture.
I am now in need of serious higher learning as termites have stuffed my house, my subfloor is destroyed, most bearers and joists in my house are eaten out and they have penetrated in to roof space eating the rafters. This has been a depressing nightmare as I cannot afford to demolish and rebuild, but lately I have been more positive thinking I can fix this myself over time, especially as I was sucessfull in replacing half of of the eaten facia boards myself so that I could put up new gutters and i can use tools. This took some improvising due to the eaten rafters but my neighbor helped me of which I am very greatful.
It is very bad damage as my kitchen floor has suck 1" from skirting boards to floor boards and the floors are very bouncy and noisy but the kitchen is worst and i hope to start there with the floor.
I know I cannot learn everything from one post but hope I can post questions to this forum and learn and others with similar problems may also be helped.
So I would be very thankful of any knowledge you can impart to me and any help with where to appropriatly post threads and for now maybe you can help with any web sites or books that deal with DIY ripping up & relacing floors ( I hope to reuse the old floor boards as these dont seem to be eaten) replacing bearers and joists on a limited budget and with a very small crawl space underneath ( I cant fit under the house in many places).
My house is a three bedroom brick veneer with wood frame and subloor on brick peers.
Thankyou and I hope to get to know you all better.
Greg