Printable View
I have a small generator but need a water pump is there any way of converting the generator INTO a pump? I need to pump up the water from the creek to get her bloody highness free water for the acre of gardens she wants planted out! :eek: nope not me!! I work away thats for her and the kids to sort all I gotta do is set the garden beds and supply the water and some heavy liftin stuff from time to time
But Ive heard it can be done... anyone have a clue how?
Cheers
a generator in to a water pump ??? ummmm
how high is the garden compared to river hight ?
what sort of garden , rain forist , natives or cacti ?
bad idear all your "heavy lifting time" will be "jerry can down to the river and back "
i have a generator / pump set up for fire fighting ( 50mm ) but would be uneconomical for vegi patch set up ,but better than your "heavy lifting time "carring jerry can of water down to river and back to vegi patch
for water transport you need to know " head height " and wanted "flow "
solar or wind mill pump / tank might be a better option
Dont think what your planning would be really practical. Main reason being the engine and generator components are usually "close coupled". ie nearly impossible to remove just the genny and - say - replace it with a pump body. Holes dont match etc etc. I think far more practical to buy the whole unit. Then at least you know the engine is matched to the pump etc. You can usually pick them up pretty cheap secondhand.
You might be better off getting a small firefighting pump and that way SWMBO can have her garden and you have a pump to throw on the ute/trailer for an emergency in the imediate vicinity. It also may work out just as finacially feasible.
Here is a good starting point www.pumpwarehouse.com.au/
Pete
Many years ago I saw a pump that was driven by the water flowing past. It had good lift - to a roof height tap, but needed a reasonable velocity past it - not necessarily a raging torrent. Didn't get a chance to dismantle it to see how it worked, but it seemed to store the water, build up pressure, then with a blurt like a flatulent whale, pump the water up to the tank. It was pretty old then, don't know if anything similar is still manufactured. If it is, I haven't seen it, but may be worth a hunt round.
Shane,
What about trying to get your hands on a second hand pressure pump and just set it up beside the genny?
Alex,
The one you are thinking of is the "Billabong Hydraulic Water Ram"..... the business is for sale here... http://www.accordbrokers.com.au/busi...tem.asp?ID=337
Not sure if the company is still trading while its up for sale though, although due to its success I would imaging that it is.
That's the one, Clinton. The link below shows one installed. I'm surprised, but very pleased, that they are still being made.
http://www.users.bigpond.com/scsiac/...s/RamPump.html
Hydraulic Rams are still made in USA, too:
http://www.riferam.com/rams/index.htm
Unfortunately, the term is also misused to describe a hydraulic (oil) cylinder.
Joe
It's "easy", all you've got to do isQuote:
Originally Posted by Wild Dingo
- take the genny off the end of the motor
- weld a universal joint to the motor shaft
- attach a long shaft to the uni joint
- depending on the motor's revs you may need to put a gearbox in between the motor and the shaft driving the pump
- which in turn is attached to the pump
- which in turn is submersed in the creek
I think it would be easiest to buy an electric submersible (or semi submersible) pump and use the genny to supply the juice
Things to consider when buying the pump are:
how high above the creek do you need to pump the water? This is called the head
how much water do you want per minute? the flow rate
in broard terms, for a given pump as the head increases the flow rate decreases.
perhaps the easiest way would be to pump water into a header tank and let her highness water the vegies using a hose from the header tank.
That way she can spend 10 mins wetting the vegies even if it takes the pump 2 hours to fill the header tank.
ian
Thanks fellas
I think I will just go buy a decent pump and be done eh? ;) Im actually thinking of getting one that can live on the trailer so maybe an ex firfighting one of some sort?
The intent is to pump it up from the creek (about an 8 in 1 incline about 200mtrs from the house proper for the garden 1/4 acre then its got to go another 200 the other way up the hill (6in1 incline) for the 1/4acre vegie patch and hit the 1/4 acre orchard on its way through... Id also like it to go up onto the roof of the house as Im setting up a sprinkler system up there... and shes planning a botanical garden on the other side of the creek but thats pretty flat so no need for stong pumping pressure
So what size would be good for the above?
You will need to talk to the sellers of these things. Make a note of the vertical lift it will need to have, how close you will have the pump to the water supply ie i think they call it draw, be advised that you can use a lower pressured pump if you use a bigger diametre polypipe to carry the water... basically like the D/C pipe diametres. What kind of irrigation have you got or are you going to install.
And let them know that you want to use it for fire fighting as well.
Pete
my set up is a 3 phase generator , 50 meters of 50mm fire fighting hose ( 5m+15m+30m), 5 horsepower pump and 250 amp mig welder and a 1500 lt tank for water ,mounted on a tandum traler , make sure you provide starting instructions for the fire fighting pump ( the first person who see's the fire might use it and contain the fire before the fire depatment turnes up )
i live on a large bush block in darwin and have had had my nabour run down the fence and borrow my trailer , he had the fire out on his block before the fire department arrived and returned it with a couple of cartons of beer and a "i need a hand to repair the fence ,THANKS" note" , tell your nabours where it is parked ( you might not be home )
it's expencive to set up , i allready had the genny and welder mounted on the trailer and just had to bye the pump , the tank is an old deasel tank that was 1/2 burried on my block ( just had to dig it out )
primeing could be a problem pumping water out of a creek , my deasel tank is air tight so as long as its full i just connect the overflow / filling pipe to the creek and turn it on , the air stays at the top of the tank
200m/8 = 25m head to the house
200m /6 =33m head to the
50m head hight might blow polly pipe joiners apart , thats a lot of preasure
so i wont put my self in the position of recomending a pump
also if you are using multiable valves for irigation you will need to install a pressure cutoff switch on the pump ( if all the valves are off you will burn out the pump ) and if you dont want to walk the 400m round trip 2x every time you want to water you will need a auto start generator ( key start not rip cord start )and lay controll cables the full length of the irrigation pipe and have the controls on the house wall , sill leaves you with the fule filling problem
might be cheaper to bribe "her bloody highness " with a high priced item she's been nagging you about ,and settle for a planter box on the window sill
i hope i helped
had a thought ,
look out for second hand wind mills ( harder to find than than rocking horse sh$%it )
the bigger the blade the more lift it will have ,
might have to have a few tanks and wind mills to make it to the top of the hill but will soon pay it's self off ( not having to pay for fule )
if the top tank is 30 m above the house you will have geat presure at the house for free , run ya toilet , out side taps , and washing off it and save on ya water bill ,
also check with the councel , water is gold and thay might want to put a meter on it and charge you $$ for the privilage of paying to pump it , is the creek all year round ,or do's it dry up in summer ?
if you have 5-10 tanks going up the hill with over flows going down to the lower tanks you shouldnt run out of water ever
Strwth!! :eek: Well done and thanks mate :cool:
I can see Im gonna have to go to a few auctions to find the equipment you speak of mate... doable... I hadnt actually thought of a windmill dumb eh? I may be able to scrounge one of one of my future SILs father who puts them together in the wheatbelt... may have an oldie laying around I can snuffle ;)
Cheers!! :cool: