How do YOU grind the primary bevel?

Grinding the primary bevel on chisels and planes blades can be one of the most time consuming, annoying things that those of us working with handtools will do. Especially if your chisel (or plane blade) is not new and you're rehabbing someone elses mistakes :eek: .

I used to grind the primary bevel by hand, then a belt sander clamped to my work mate. Now I use a bench griner with an aluminium oxide wheel and I use the time I used to waste getting on with the woodworking.

What does everyone else do???

A bench grinder with a white wheel and a small tub of water. Followed by a run over a scangrind wet wheel and then polished on wet stones with a LV MkII holder. Secondary bevel done with the LV also.

With one of these.

A 6" bench grinder with a white Aluminum oxide wheel works for me.

Ive tried it all ways and it was always a bit of a grind:) until I got the Tormek a couple of years ago.
A great piece of kit and it takes no time at all to produce great results. Wouldnt be without it now.
beejay1
http://community.webshots.com/user/eunos9

Have a look at the poll results,
nearly 20% of forum members throw their chisels out instead of regrinding

Quote:

---

Originally Posted by echnidna

Have a look at the poll results,
nearly 20% of forum members throw their chisels out instead of regrinding

---

I've had chisels like that.

Quote:

---

Originally Posted by Termite

With one of these.

---

Neat looking machine Mr Termite!

I've seen those in US stores/catalogues, but not a 50Hz/240v jobbie here. Where'd you source yours?

Cheers!

Quote:

---

Originally Posted by echnidna

Have a look at the poll results,
nearly 20% of forum members throw their chisels out instead of regrinding

---

Just think of all those rich buggars - throw their LN or Robert Sorby's out when they're blunt :eek: :eek:

Dustbin crawl around Toorak's woodies anyone?

Cheers!

I have just finished doing a Derek on my belt sander. The belt sander actually is fitted straight on to the end of the bench grinder instead of a grinding wheel.

Works a treat cost very little fair bit of time to get the setting gauge done up very straight and square.

The result is great though very fast way to grind blades to a precise angle and straight and square. Belt them on this quick polish on a stone and you are laughing.

Studley

Hi Studley,

Pics please!

Cheers!

Grinding the primary bevel on chisels and planes blades can be one of the most time consuming, annoying things that those of us working with handtools will do. Especially if your chisel (or plane blade) is not new and you're rehabbing someone elses mistakes :eek: .

I used to grind the primary bevel by hand with ScarySharp. Now I use a bench grinder with an aluminium oxide wheel, then hone with waterstones; and I use the time I used to waste getting on with the woodworking.

:):)

Had to vote bench grinder as thats what I use for my chisels, but I only use scarey sharp on my one and only plane... doesnt get used much so its about 6mths inbetween reseting the primary bevel.(lucky I scored a heap of 60 grit W&D, but almost out cant find it anymore?)

Quote:

---

Originally Posted by Auld Bassoon

Neat looking machine Mr Termite!

I've seen those in US stores/catalogues, but not a 50Hz/240v jobbie here. Where'd you source yours?

Cheers!

---

Timbecon, bought it for doing my jointer blades then found it great for all other blades/chisels too.

Quote:

---

Originally Posted by Studley 2436

I have just finished doing a Derek on my belt sander. ...

---

:confused: What's a Derek?

What I really meant to ask is what grit belt do you use? Cheers :)