Phillips LED Batten Lighting on sale

I'm currently fitting out my Shed at the moment, just waiting for the Expoy flooring to dry:D

I had a mezz floor installed last week, 3700mm deep x 6000mm long with an usable opening of 3800mm for my work bench area, next to the bathroom.

I started to look for lighting, as its no longer got enough light from the Big LED downlight in the shed, the Mezzanine shades it.

I found these Phillips 1200mm 21 Watt battens 4000K going for a reasonable price, $25 each from this mob

https://reductionrevolution.com.au/p...ght-led-batten

I picked up 5 as there seemed cheap enough, there is a Stat sheets, but it doesn't give a CRI at all, but as ill be finishing next to a north facing 3.6m wide 5.5mtr high roller door i should get good daylight in QLD to see when sanding and oiling.

Just putting it out there if anyone is looking for LED battens at the moment.


Cheers

Thank you, I just ordered ten! That oughta fix the lighting in my workshop!

Quote:

---

Originally Posted by markharrison

Thank you, I just ordered ten! That oughta fix the lighting in my workshop!

---

Not a problem, its worth sharing as most of use are guilty of not having enough light, I've never seen them that cheap before, and it is a Phillips branded light, whether that matters quality wise i don't know, but at $25 I'm giving them a go.


You will have to start wearing sunscreen and sunglasses in the workshop with 10 of them.

Quote:

---

Originally Posted by bryn23

You will have to start wearing sunscreen and sunglasses in the workshop with 10 of them.

---

As they say on The Mythbusters; if it's worth doing, it's worth over-doing! :)

CRI is 80.
It's in the PDF spec sheet.

Quote:

---

Originally Posted by graham.murfett

CRI is 80.
It's in the PDF spec sheet.

---

Well like most men, i didn't really look that hard :cool:, though it was odd it wasn't in the spec sheet.

80 CRI will work me for now, ideally higher is better, but i now have a budget, never let your wife become an accountant...:rolleyes:

i also notice that they have High bay lights on sale as well.

This one would be nice directly over the workbench, at 110 Watts, Rectangular and 85 CRI and $299 I'm glad i didn't see it before i placed my order, not to sure how i would have been able to justify that to the wife apart from less sparky fees due to one hook up over 5 connections.

https://reductionrevolution.com.au/p...p-led-high-bay

Although I'm wondering if 5 of the 1200mm ones is enough now... 2 of them a meter in front of the workbench, two a meter behind me and one directly over the workbench should be ample.... I think I'm just over analysing it now...

looks like a good deal wrong colour for me though

What about this gnarly thing! A movement sensing TUBE!

https://reductionrevolution.com.au/p...-motion-sensor

Quote:

---

Originally Posted by woodPixel

What about this gnarly thing! A movement sensing TUBE!

https://reductionrevolution.com.au/p...-motion-sensor

---

Wow, what a great idea, could save some companies a bit of money and comply with OHS.

FYI. I bought 2 x Philips 21W, 2000 lumen, 4000K, 1200mm Surface mount LED Battens at Bunnings for $25.00 each. They still have OSRM 19W 1200mm LED replacements tubes for old Fluro hardware for $19.95 each, I've had 6 installed for over a year now, the difference between them and the old 46W Fluro is really night and day, they come in 4000K and 6000K, I feel 6000K is cleaner and brighter so that's what I retro fitted.

Just thought id post a pic of the 21 watt 4000k Phillips LED 1200mm lights installed.

Attachment 413051

So far they are ok, haven't done any real woodworking under it yet, just making stuff for my shed.

MandJ is right, they are now at Bunnings, for $25 each as well, i saw them yesterday:2tsup:

We have 4 of these (6000k) in our 6m x 3m WS, however I fitted glossy white sheeting on the ceiling and have light coloured walls and white cabinets, this really makes a huge difference to room brightness - almost like bright sunlight.

Have swapped all 21 fluro tubes in the shed to LED tubes from eBay. $10 each if buying 10 at a time. AEG brand.
In older batten holders you can remove the starter and that is all that is needed. However, I found my power usage per light was better when the ballast was removed. Dropped from 97 watts to 28 watts when wired directly. Newer batten holders require removal of everything inside.
Re-wire requires you to run the active lead to one end, either terminal and the other lead to the opposite end. Technically speaking, a job for a sparky.
Used 4000K mostly with the odd 6000K. great light to work under.

Hooroo.

John.

Quote:

---

Originally Posted by Wimmera Jack

Have swapped all 21 fluro tubes in the shed to LED tubes from eBay. $10 each if buying 10 at a time. AEG brand.
In older batten holders you can remove the starter and that is all that is needed. However, I found my power usage per light was better when the ballast was removed. Dropped from 97 watts to 28 watts when wired directly. Newer batten holders require removal of everything inside.
Re-wire requires you to run the active lead to one end, either terminal and the other lead to the opposite end. Technically speaking, a job for a sparky.
Used 4000K mostly with the odd 6000K. great light to work under.

Hooroo.

John.

---

I'd be easier just to replace the whole assembly wouldn't it.

than retro fitting the fluro to LED tubes in newer fluro fittings, considering what sparky charge out.

Big power savings across 21 fluros:2tsup: if your working off 97 to 28watts