Pin holes/bubbles in NC lacquer

Quote:

---

Originally Posted by rod1949

I was using some Solarez today. I was filling/flooding some cracks. Put the timber in the sun to cure which is instant and I put a finger on the curing solarez to fine it gets extremely HOT whilst curing.

---

Rod,

Are you getting the desired results with Solarez?

Quote:

---

Originally Posted by John Samuel

Rod,

Are you getting the desired results with Solarez?

---

Yes I am John. Given its fluidness (compared resin) and instant drying filling the voids is very quick. A downside is, as I'm doing spot fills and not over the whole timber, I get spot stains that darkens the timber and thus this shows in the finish.

Just finished a bedside table in NGR.

Used two coats of Solarez to seal the top.

Works like magic. No bubbles or pinholes.

Solarez is great at eliminating pin holes and bubbles. It is also a first class grain filler. It will be a permanent feature in my workshop.