New server - REPORT PROBLEMS HERE

Quote:

---

Originally Posted by BAB600

Times
I have just posted free to good home a saw
I posted at 10 .20 am today came up as 9. 20am
I know its only small but is this what your after

---

Brian - You're just ahead of your time.

Quote:

---

Originally Posted by Anodyne

Wiki button
Hi, I'm looking about the site and when I click on wiki I get "Internet Explorer can't display this page" - ? a problem 9th Feb 2011 02:46 PM

---

Problem with the url cycling it looks like this:
http ://www.woodworkforums.com/wiki/index.php/Wiki/index.php/Wiki/index.php/Wiki/
index.php/Wiki/index.php/Wiki/index.php/Wiki/index.php/Wiki/index.php/Wiki/index.php/Wiki/
index.php/Wiki/index.php/Wiki/index.php/Wiki/index.php/Wiki/index.php/Wiki/index.php/Wiki/index.php/Wiki/index.php/Wiki/index.php

When it should look like this:
http ://www.woodworkforums.com/wiki/index.php
Bit of luck it should be back up and running later this arvo. :fingerscrossed:
Cheers - Neil :U

Hi ,
Mate - still getting the "greencard/ lottery" stuff on this site when I go to a thread.
I use Malwarebytes, even paid for the expensive version....dunno.
Bruce.

as the title says just comes up with the database error page have tried refresh and going back to the forum start and still no go, however looking at the page with timber, small milling etc. I can load the listed last thread. Also tried to respond to a thread last night and the whole lot froze.

Travis

Warning: mysql_query() [function.mysql-query]: Unable to save result set in [path]/includes/class_core.php on line 408

this is what comes up!!

Quote:

---

Originally Posted by Travis Edwards

as the title says just comes up with the database error page have tried refresh and going back to the forum start and still no go, however looking at the page with timber, small milling etc. I can load the listed last thread. Also tried to respond to a thread last night and the whole lot froze.

Travis

Warning: mysql_query() [function.mysql-query]: Unable to save result set in [path]/includes/class_core.php on line 408

this is what comes up!!

---

Hi there

Go here; Woodwork Forums Database Error then try holding the shift key and refresh your browser. To me, it sounds like you have last nights error page cached.

Database errors were happening from 6:54pm to 6:58pm then there was approx 10 minutes of high server load, while it tried to deal with the backed up queries.

regards

I get the same error as Travis earlier reported trying to access the Timber forum at 1735 today.


Warning: mysql_query() [function.mysql-query]: Unable to save result set in [path]/includes/class_core.php on line 408
https://www.woodworkforums.com/image.php?type=dberror Database error

Tried refreshing and shift refreshing but no change.

Regards,
Steve.

Quote:

---

Originally Posted by stevemc32

I get the same error as Travis earlier reported trying to access the Timber forum at 1735 today.


Warning: mysql_query() [function.mysql-query]: Unable to save result set in [path]/includes/class_core.php on line 408
https://www.woodworkforums.com/image.php?type=dberror Database error

Tried refreshing and shift refreshing but no change.

Regards,
Steve.

---

Thanks, the cron table was corrupt, i've repaired it and you shouldn't be seeing the error anymore.

Quote:

---

Originally Posted by bellyup

Hi ,
Mate - still getting the "greencard/ lottery" stuff on this site when I go to a thread.
I use Malwarebytes, even paid for the expensive version....dunno.
Bruce.

---

What browser are you using? Chrome?

Can you post a screen shot for us?

was going to search the forum , and got stuck in the "random question" merry go round , answer it properly and have to answer another question " isnt the answer to " what country dose the kangeroo live "= " this one " ???

had to log on to type this so ill try again loged on :2tsup:


works when your logged on , ill log out and try the search engine again

sorry false alarm , tryed 3 times and it worked every time , while i was logged out

Hi Team.. great job so far.
I have replied to a PM today and also sent a new message to that member but I am not sure the message is going out as when I try to open "Sent" in messaging, it shows zero. my received PM message shows as being replied to however.. is it me or is there a problem? I just tried to upload a cropped screen shot of just the message pane but I cant see it here..
cheers
peter

Quote:

---

Originally Posted by Peda

.
I have replied to a PM today and also sent a new message to that member but I am not sure the message is going out as when I try to open "Sent" in messaging, it shows zero.
peter

---

Peter,

If you go to "User CP", then to "Settings and Options - Edit options" at the bottom you will find "When sending private messages the forum can make a copy of the message in your Sent Items folder.
Save a copy of sent messages in my Sent Items folder by default"

Click yes to the question and save settings.


Peter.

Hey thanks Peter.. I have gone in and changed a few settings .. It used to work before so I assumed it was the server upgrade and not my settings...thanks again.
cheers
peter

Quote:

---

Originally Posted by Peda

Hey thanks Peter.. I have gone in and changed a few settings .. It used to work before so I assumed it was the server upgrade and not my settings...thanks again.
cheers
peter

---

Hi there

I think there were some changes to usergroup settings to combat spammers. Your group may have had this setting overlooked, i'll check it out later today.

regards

Hi Neil,
Only saw your message re "any issues" the other day, nothing out of the ordinary as far as I am aware. A great forum, well done.
Cheers David

Hi Neil,
I just treid to upload two photos but it failed, I tried twice. Can you help.
Bob

Send the photos to me via Email: [email protected] and I will upload them for you.

I take it that you followed the directions here? https://www.woodworkforums.com/f36/po...ur-post-78760/

I've noticed over the last few days the odd post or two that appeared to have no content.
I ignored it and presumed the poster had deleted their post via edit but i found one in a thread just now and it was the only response. And it was by Tea Lady and she is never short of something to say :D
anyway, upon closer investigation the body of the post, including the signature, was so small that I couldn't see it. Only when i highlited the area could i see that something was there. I had to right click on it and open it with something else to read it.
I've noticed this a few times lately and it was usually just one post in the middle of a thread. :?
I'll try and find it again and take a screen shot.

Here is the screeny.

Neil,
Got a "server busy " message at around 7pm (Qld time) which continued until around 7:20 pm

Quote:

---

Originally Posted by NCArcher

Here is the screeny.

---

Doesn't happen on my 'puter

Quote:

---

Originally Posted by Ian Smith

Neil,
Got a "server busy " message at around 7pm (Qld time) which continued until around 7:20 pm

---

Yep, same here (slightly different times, we're on "real" time:D

Just found another one. Also a TL post. I think she is messin' with me. All other post appear ok.
Edit: I just did a quick search and all of TL's posts are coming up like that for me I checked my settings but i can't see anything different.

Check your User CP for any on your ignore list.

Grasping at straws as all posts come up OK for me also.

for about 20 minutes last night, sometime after 6:30pm, apologies for not being able to give a more accurate time!

Hi, i tried to upload a couple of photos this morning using the paper clip attachment and got a message saying a security token was missing and my submission hadn't worked.
i will try upload using a link from photobucket

Quote:

---

Originally Posted by fenderbelly

Hi, i tried to upload a couple of photos this morning using the paper clip attachment and got a message saying a security token was missing and my submission hadn't worked.
i will try upload using a link from photobucket

---

Fred, did you resize the photos before uploading or did you rely on the forum to do that for you. How big are they (in Mb)?

Hi,

I have twice replied to a private message from CGreene55, but it appears they are not getting out or not being recorded as "Sent"?

Ian Brewster

Hi
:? Tried to get on to Forum last night at 8.05pm. Only got message'Server is too busy at the moment. Please try again later". Tried again numerous times before putting the computer to bed for the night.
Mick C.

Quote:

---

Originally Posted by ijbrewst

Hi,

I have twice replied to a private message from CGreene55, but it appears they are not getting out or not being recorded as "Sent"?

Ian Brewster

---

You have keeping a copy of sent messages switched off.

You can reset it in your UserCP, top left corner.

Would not return to index from this thread.

Are you sure you didn't open it in a new tab? I have done that and abused the stupid computer.:rolleyes::D

I didn't think so, but could be possible.

Quote:

---

Originally Posted by Big Shed

Fred, did you resize the photos before uploading or did you rely on the forum to do that for you. How big are they (in Mb)?

---

That may be the problem, one is 6mbs and the other just over 2mbs
I will keep an eye on that in future. Sorry

Quote:

---

Originally Posted by fenderbelly

Hi, i tried to upload a couple of photos this morning using the paper clip attachment and got a message saying a security token was missing and my submission hadn't worked.
i will try upload using a link from photobucket

---

Hi there

How big was the photo (filesize)?

edit - ignore this, was replying to an earlier post :doh:

regards

Quote:

---

Originally Posted by fenderbelly

That may be the problem, one is 6mbs and the other just over 2mbs
I will keep an eye on that in future. Sorry

---

Hi there

Is there any chance you could try uploading the files to this thread? I've updated a setting on the server that 'may' help you avoid the token error.

thanks

I received an email advising of a reply to my post
https://www.woodworkforums.com/f187/george-ii-walnut-fretwork-mirror-130887/index3.html#post1280284
but when logged onto the forum there was no reply there and my post was showing as the last one.

Well there was, and there isn't.

The poster deleted his post, obviously after the email went out to you.

OK this is really annoying.
As posted earlier, certain posts are not displaying properly.
So far all posts by Tea Lady and Watson.
I don't have either of them on ignore or any settings different. Could it be something in their sigs that is causing this? Have i inadvertantly turned something off/on? Help :C

Quote:

---

Originally Posted by NCArcher

OK this is really annoying.
As posted earlier, certain posts are not displaying properly.
So far all posts by Tea Lady and Watson.
I don't have either of them on ignore or any settings different. Could it be something in their sigs that is causing this? Have i inadvertantly turned something off/on? Help :C

---

Will have a look. Watson I wouldn't worry about but the other, well.:rolleyes:

Settings seem right.

All I can suggest is to log off. Clear cookies and see if that works.

Just wondering if you have a virus that is attacking IE.

Have you tried another browser to see if it does the same thing.