Thank you, MacS, but are you sanding between coats or not? And, what means 2pac?
Printable View
Thank you, MacS, but are you sanding between coats or not? And, what means 2pac?
Halp!
I'm spraying black glossy nitrocellulose lacquer with an Earlex 5000 Pro Spray Station. I have the 1.5mm needle turned out about 1 1/8 to 1 1/4 turns which seems to work well. I thinned out the lacquer to about 22 seconds. I'm doing better than I was yesterday. I'm still getting what look like pinholes on the surface. What can I do? I've read that I should use Star Flash-Off Control Solvent, but I can't find any. My sprayer doesn't seem to have a condensation trap, so I don't know what else to do. Do I need to thin the paint more? I was at about 40 seconds yesterday, and today was quite a bit better. Thank you for your help. I'm going to try again tomorrow.