Printable View
I dunno about this upside down thing. I had the exact same problem. Even bought a second lighter. Tried it both ways up and still no fill with either lighter. I gave up at this point and got an old fashioned scratchy sparky thingy. I'll try to find them, but I seem to remember I tied it all ways up. Just didn't seem to be opening the valve in the gas bottle.
I dunno whats going opn with replies above but when filling a lighter you employ dockers or steevedoors, pull the lighter alongside of the wharf and crack the whip.
Hope that helps with the above problem.
That sort of explains the Barmy Army bod trying to light his pipe by rubbing two cricket stumps together :DQuote:
Originally Posted by jow104
Richard
Did you fully disperse the gas before filling?
Daddles, there are two type's of gas bottles for your BBQ, one for the BBQ it's self, and one for refilling. The one for refilling is marked with a black or blue stripe top to bottom, this indicates an internal tube. The gas expands when the valve is opened and pushes the liquidfied gas up the tube and into the empty bottle. This is the reason why you have to invert the refill can, as it does not have an internal tube.
A gas ligter on the otherhand has an induction tube as it is required for the correct air/gas ratio for ignition to take place, as for your lighter inverting places the liquid at the valve, pushing down opens the valve and the liquid expands and pushes the liquid into the lighter. Hope this helps you understand what is actually going on. Also as already mentioned, take care with your skin being exposed to the liqufied gas as it will leave a nasty burn.:)