If you've been rubbing somebody else's dunny with a scotch pad, remind me not to shake hands if we ever meet up. :eek:
Why clean it ? Go to Reese's. Buy a new one.
They aren't all that expensive.
Printable View
If you've been rubbing somebody else's dunny with a scotch pad, remind me not to shake hands if we ever meet up. :eek:
Why clean it ? Go to Reese's. Buy a new one.
They aren't all that expensive.
I've had success with tablets for cleaning dentures - dissolve as per instructions and pour in the pan and leave for a few hours.
Mick
I've used with great success a granite cleaner from applied chemicals, the tin has lost it's label so I am afraid I cannot name the cleaner but it was white granules and disolved in water. Half a cup of granules into the bowl and leave it for an hour or so, a quick swish with the toilet brush and the lot sparkled as no doubt did the pipe for about 30' or so. Used it on several friends bowls as our water has a high iron content and most of the stain was probably rust as well as slack cleaning. As for scotch bright there is no way I would shove my hand down the S bend for some intimate scrubbing.
John
If its a recurring problem due ti the water supply replacing the pan WONT solve the problem as the buildup will happen again.Quote:
Originally Posted by Jacksin
I have thought about polishing the bowl with an auto polish with silicon or some non stick additive, but haven't tried it yet.
I just give a major clean when the buildup is thick enough to flake off. Interestingly the same mineralised water supply leaves a sandy colored buildup on stainless urinals and on ceramic floor tiles but leaves a definite poo brown in the white toilet bowls.
I have a few friends who have fixed the brown stain stuff simply and easily.Quote:
Originally Posted by Andy Mac
Good commercial pump guys can fix the iron oxide staining situation from borewater too. At least there's a bloke in Oxenford and another in Gympie that I know of that can.
Basically you need a "special" filter, and an oxidant injected in the water stream bofore it hits the filter. The gear is available quite cheaply, if you can find someone who knows what they are doing, and usually they inject about 2ppm liquid chlorine, which is a lower concentration than normal town water.
Once the stain is there though, only hydrochloric or citric acid works apparently.
Cheers,
P
I can now understand why Australians drink a lot of other liquids besides water,;)
oh yes john,
most of our houses have a small press button well.
we call it the wc
Bob, you don't realise how true you speak.
Our American friends have a stainless steel notice printed (stamped) in many of the public conveniences requesting their patrons not to use the toilet bowls for washing their hair. (not the wash basins)
.
Honest.:) ;) :D
RATFLMAO:)Quote:
Originally Posted by jow104
Lets play "whats that smell"....:DQuote:
Our American friends have a stainless steel notice printed (stamped) in many of the public conveniences requesting their patrons not to use the toilet bowls for washing their hair. (not the wash basins)
I suppose it means you dont need hairspray to hold it in place
Quick spritz of Eau de Toilet spray......... :D
After successfully getting rid of a lot of rust on a camping stove, I suggest giving citric acid a go.
I am amazed at how well it worked, returning back to the base metal quite well. ie shiny steel.
Cleaning toilets. It's not a fun job, but someone's got to do it. The problem is that most everybody does it, it's just that a lot of them just do it wrong.I have a house hold tip for you, Borex powder found in the laundry section at the grocery story is an old fashioned workhorse. Sprinkle it in and work that powder with your plastic brush. Let it sit in the bowl for half an hour. Flush, and it will be snowy white again.