Felder slotting cutter

Quote:

---

Originally Posted by markharrison

If you know of where to buy one with a 30mm arbor diameter, I'm all ears. Be damned if I can find one.

---

https://dimar.com.au/wp-content/uploads/2014/10/mf1.jpg

ph: 0295218881. Joseph

Quote:

---

Originally Posted by AJ.

drilling harder steel you need to run the drill much slower than normal with more pressure than normal. You can also sharpen a masonary bit if need be, but that might be what you were referring to.

Cheers Andrew

---

I couldn't be bothered as the brother in law with the full machine shop works better and he actually knows what he is doing. It was a carbide drill bit, not a masonery bit and it cost very little to buy.