Printable View
I went with boral too, Karri natural grade, layed by me and if I do say so myself it looks fantastic, especially with the black putty the sander used, he did a great job. Little movement. Just a word of warning stick with some one reputable I have heard some horror stories about people who bought on the cheap from the auctions and the like and when they have opened the pack they had throw half of it away. I payed about $38/m last year from connollys timber in coburg, good bloke.
Hey Gumby, I liked the Spotted Gum as well. I just thought it was a little too brown. What are your thoughts?Quote:
Originally Posted by Gumby
Dan74, my brother laid some Karri and it was VERY red. I don't think they had it stained. Was your Karri very red?Quote:
Originally Posted by Dan_574
One other thing - how long should it be left on site to acclimatise before it is laid?
Mine didn't aclimatize at all. It was in the garage for a couple of weeks and then straight on the floor. Maybe a bit of time in the house would have been better but it was summer.Quote:
Originally Posted by vGolfer
I love the contrasts in the spotted gum. Yes, it's mainly brown but we did a copmlete reno so we just stayed with colours that would match it. I had new plaster walls to replace to crappy old pine boards and did all new window archs, skirtings, the lot. It depends on what is available. We had to wait for the spotted gum as they had run out and we couldn't get any in melboure anywhere at the time. The grain is magnificent and it's about the hardest of them all. It's lovely just walking around on it with a pair of thick socks. :D
You can get it with or without those sap marks but i prefer them left in - it looks more natural. (apparently that is what most people do)
Thanks for the pics. The floor looks great.
I think we have decided on Sydney Bluegum. Hopefully it looks good at our place.
The guy at Tait told us to allow for 5% wastage. He also reinforced the point that the timber will move (expand/shrink) and that we should put curtains in rooms that get a lot of sunlight.
That made me a bit anxious. One of our rooms faces west and gets tons of sun. we don't have any window coverings at all (I know we should but we don't). Is this going to age the timber a lot more than in other rooms in the house?
here you go, Its not too red, I think the blue gum is redder.
Looks great Dan. Tait told me that the current batches of Redgum they have been receiving have been a bit lighter.
The quoted me about $71 per sqm reduced from $88. That's for the classic grade. Does that sound about right?
And as far as sanding and polishing goes, is it advisable to get a pro to do this? I've been told it can be around $50 per sqm for sanding and polishing which sounds like a lot.
That looks really nice Dan but I'd move that mat under the table unless you've had the timber for a while. We were told that we shouldn't put down any mats for at least 12 months because you'll end up with light patches underneath as the surrounding timber darkens. At the end of our family room the widow faces North and we get a lot of sun in there, particularly in winter when the sun is down low. No indoor curtains yet either.We have an outdoor blind which comes down every day when we are at work to protect the floor. Even so, it has darkened marginally more down there than the rest of the room. It's almost impossible to notice unless you know it's there. I don't think there's a lot you can do about it. I certainly wouldn't worry about different rooms though. They will change if there's a different amount of light but you'll be the only one who notices.
As I said, watch out for mats, and move any furnture around for the first year. Even the small section under my sub-woofer is slightly lighter so i move that too. I have furnitue on small legs which is preferable (you can see the cabinet in the photo I posted). That allows light underneath.
Unfortunately, being natural timber , there isn't anything you can do to stop it. Just be aware it happens. (I love how it has darkened though, it's stunning)
Sounds about right . The spotted gum was around $65/m and I think about $55/m to have it put down, sanded, sealed and finished. It was $7000 all up for about 60sqmQuote:
Originally Posted by vGolfer
Another tip, take the skirting boards off before laying the floor and then put them back (or new ones). That means you don't have the quad all round the room. You can't avoid it in the kitchen though, unless you intend to renovate that as well.
Golfer, I think I mentioned earlier that it cost me about $38/m about 12-18 months ago. Give Craig a call at connollys timber and see what he can do, he's in coburg 1300855031.
Yeah the flooring under the mat is alot lighter, thanks for the advice. Im not going to worry about it just yet because with a 4 and 5 year old its hard to get them to lift the chairs(even with felt under them it hasnt helped) the kids are pretty hard on the floors, so I will wait another couple of years when they are older and get them redone. I might be finished the house by then as well(but I doubt it).
Definately get a pro in to sand and finish the floor, I went with 1pack poly satin and it's great. I used clarkefield floors and they charged about $25-30/m. Where in melb are you. Connolys can supply the glue as well.
IU don't think getting them redone will solve the light/dark problem. I have big felt pads from Bunnings and the chairs slide just fine. (21 year olds don't lift chairs either )Quote:
Originally Posted by Dan_574
;)