IM BAAAACK!!! So gidday!!

Printable View

Show 40 post(s) from this thread on one page

5th February 2011, 07:19 PM
munruben

Welcome back Shane, good to see you firing on all cylinders again mate. :2tsup::2tsup::2tsup:
6th February 2011, 10:38 AM
Drillit

Hi Dingo,
Be careful of your namesake in Broome and surrounds. But little good wood so you might have to take up pearl diving and havin a skewie on Cable Beach as the sunsets. Enjoy Broome- beautiful place for a holiday. Drillit.
6th February 2011, 10:53 AM
The Bleeder

Where fore art thou Ding ......Shyte he's back.

Welcome back Shane. This place needs an injection of something...
6th February 2011, 07:53 PM
dai sensei

You may have been gone Dingo, but there have been posts every now and then by others keeping us up to date of your where abouts.

Cheers mate, welcome back :U
7th February 2011, 12:38 PM
artme

G'day Shane and welcome back to heaven!!:2tsup::2tsup::2tsup:

Thought you had fallen off the edge of the planet!:o

Show 40 post(s) from this thread on one page

All times are GMT +11. The time now is 10:31 AM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.