Me mate SilentC said we didn’t try hard enough to meet up last year. OK slackers, the man has spoken. Let show him your repentance.
Friday, Saturday or Sunday? Just pick one. :)
Printable View
Me mate SilentC said we didn’t try hard enough to meet up last year. OK slackers, the man has spoken. Let show him your repentance.
Friday, Saturday or Sunday? Just pick one. :)
Give all three a miss and that way I won't hafta pretend to be polite to yers.......
Would prefer Friday, but for reasons.. etc etcQuote:
Originally Posted by Wongo
It has to be Saturday or Sunday for me this year
I've got to go one of the days though, if for no other reason than to flash me cap.
I think I'll give Christopha's demo a miss though. :p
Friday for me, first stop the Ubeaut stand for my forum cap, then hae a look around and drool :D ! See if there is any real "show prices" on the Veritas range (The No 80 Cabinet scraper specifically). With hopefully 300 pancakes in the skyrocket, I can have a good day. Hope to meet some of there.
Friday for me - same as Pat, pick up the cap, then look out for a 6' tall Chinaman or anyone with a Bellingham FB T-shirt.
Sunday for me, best deals then! Also chance to revive the old muffin saga. :rolleyes: Remember Darren?
Scott
Are you bringing Jasmine? And MKCL?
Zed and his Muffins became a legend last year, anyone prepared to feed me muffins can have a thirty second discount on all insults! :D
i'll bring some muffins, someone else should have a pancake stall... they'll make a killin'
Would love to go on Friday, but it is going to have to be Saturday. Also have to pick up the cap.
saturday or sunday ?
heaps of work and family commitments lately
i hope there will still be some caps left
cheers
multinut
:cool:
Friday if work will allow - otherwise - probably Saturday...
Have to get to meet some of you board scoundrels!!
Guess U Beaut is first stop!!
Friday for me, try to get there before all the school busses arrive!
Neil, do we have to send you a PM for a reserved cap (non foily) or will the thread response be enough? http://www.woodworkforums.ubeaut.com...cons/icon7.gif http://www.woodworkforums.ubeaut.com...cons/icon7.gif http://www.woodworkforums.ubeaut.com...cons/icon7.gif
Hey!! , I've just worked out how to make these smiley thingies work.....DUH! I suppose "thick as two planks" is woodie enough. http://www.woodworkforums.ubeaut.com...ons/icon11.gif
cheers,
Graeme
I will be going on Sunday, and walking around, checking out what i want, then going back and making offers, to buy it there and then. I bought my first router a few years back, cost me $149, got free gear with it too. I am hoping to spend about $400- $500 this year, i want to buy some big machines, on the cheap. I may also buy a slab or 2, and make a dining table.
Whats withthe cap talk, do we get a free cap for being roum members?
$400- $500? Tell 'im he's dreamin.
I think that's a bit rich!! Neil provides and maintains the Bulletin Board for free and then you are hoping he will give you a $20 cap too! Splutter splutter.Quote:
Originally Posted by The Hornet
I'll be there Friday, can't spend too much because I'm on limited funds after the LV shipment, but I think I can afford entry and a cap
Don't know about the cap, but for the Slab, see me at Boutique Timbers Stand , Outside against west wall, I'll give all members at least 10-15%.Quote:
Originally Posted by The Hornet
Greg
Make mine a slab of Coopers pale and make sure it's nice and cold :cool:Quote:
Originally Posted by Greg Ward
Why would you want a pale cold barrel?Quote:
Originally Posted by Christopha
That's not very nice, charging us extra. :rolleyes:Quote:
Originally Posted by Greg Ward
Hovo, You're lucky, you're only 30km north of Rollands Plains (Turn off Tele Point ) where =Mal has around 400cu metres of everything sitting under the grey gums.Quote:
Originally Posted by hovo
Pick up there and save yourself a trip to Sydney, tou won't get charged extra, and will get free bad coffee
Greg
Quote:
Originally Posted by craigb
And T-Shirt! :D :D
-Ryan
Indeed :DQuote:
Originally Posted by ryanarcher
I'll take my camera in case I bump into any other forum reprobates. ;) :)
I will be there demonstrating on the Saturday if the dates work right, have a wedding in Chatswood to attend on June 18th so sure hope they arent the same day.
Do we pre-order a cap or will there be ones in stock to buy on the day. Been busy with work so missed a lot of the 'cap' talk.
Yeah me too. What Oges just said, about the cap.
You have to ask Neil to sell you one.
They cost about 25 or 28 dollars dependng on the type you want.
Do a search and all will be revealed.
And they are surprisingly good quality too!!.
Not surprising to Neil I'm sure (because he is pretty picky about that sort of stuff), but as one who seems to find a new cap on his desk every other day, I have about a 2% "keeper" rate with caps, and these are UBeaut!
Cheers,
P
I'll be there Friday now that I know about the caps.
OK kids, let get together at 1pm outside the building on Friday, Saturday and Sunday. I will be there on Friday and Sunday.
See you there. :)
Work commitments mean I don't get to go at all this year. :(
So I want everyone to spend an extra few hundred each in my honour. OK :D
If you feel bad about this, just send me the stuff you buy.
Bummer.Quote:
Originally Posted by outback
How about I take some photo's of the forum heads that are there on the day I go (Saturday btw)? At least you'll get laugh that way.
That'd be nice, maybe even a group photo, complete with foilies. :D
By the time we get to Sydney we should have plenty of caps for all (if the rest of the order turns up before we leave), however those who phoned, faxed or pm'd will have theirs saved for them and the others will be first come first searved.
Cheers - Neil :)
neil, just in case - please reserve one for me - foily or no - dont care....
cheers
Neil, you can probably use buttonhole scissors for the slots up the sides for his ears.Quote:
Originally Posted by Zed
Cheers,
P
:D
Interesting - Wongo's 'outside' meeting place map appears to have the meeting point marked INSIDE the hall......
Well at least its near the Gents & Ladies facilities :rolleyes:
I think I'll wear my 'He who dies with the most tools wins' hat for the show.
The maps are available for us sick puppies whom plan their attack on the showhttp://www.workingwithwood.com/sydney/site.htm UBeaut is stand 72 in the Royal Hall of Industries, next to "Hardware Co" and opposite "Premium Hardware". Got to visit there first for my cap and to meet the crew! :D
The usual proviso is issued "Please note: Plans may change."
Other drool inducing stands - Lie Nielson 109 & HNT 37A
Where is that drool smilie? :) https://www.ubeaut.biz/zonked.gif https://www.ubeaut.biz/dizzy.gif
Are we meeting at Wongo's suggested spot? otherwise I will be there with Pat Malone :rolleyes: . I'll be there Saturday and most probably Sunday aswell now.
I'll be at stand 226 - CCWT - in the Hordern Pav. demoing the scrollsaw on Saturday. I'll be the tall young fella surrounded by the ol....experienced guys. :eek:
Let me know about the designated spot.
It looks to me like it's just in the general outside area between the two halls where they have the saw mill demos?
I'll be there Saturday, wearing my hat (and T Shirt ;) )
I'll drop by your stand anyway .
Cool will head to the general area around 1pm then, with either have the Forum Cap on or the Central Coast Scrollers cap .. probably the first one if I have picked it up by then.