Installing a shower base.

Printable View

22nd May 2009, 09:50 AM
Reno RSS Feed

Installing a shower base.

I need to install a shower base and it appears that the bottom of the base has a 50mm threaded outlet but the waste pipe that i am connecting it to is 100mm. Can i simply run a piece of 50mm pipe so that it sits inside the 100mm waste pipe or do i have to reduce the 100mm pipe down to 50mm and then connect to the outlet of the base. The 2nd option becomes a lot more difficult as accesss under the house is virtually impossible.
Thanks

Read the full thread at RenovateForum.com...

All times are GMT +11. The time now is 10:49 PM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.