diamond concrete core drill

Printable View

16th May 2009, 07:30 PM
Reno RSS Feed

diamond concrete core drill

Hey guys,

Just drilled a few 150mm deep holes in a concrete retaining wall for a new fence. Found a pretty cheap rig which did the job.

These bits cost $159 and I'm using an old dynalink hammer drill $79 (the really cheap one from Bunnings a few years ago) which is very similar to the Ozito one.

Took about 20 minutes per hole but worked pretty well.

Cheers
Pulse

Read the full thread at RenovateForum.com...

All times are GMT +11. The time now is 08:23 PM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.