Bearer Size

Printable View

2nd March 2009, 10:30 PM
Reno RSS Feed

Bearer Size

Ok guys, first question/post here, been great sifting through all the info.

I'm planning on building a deck,next to the house on two sides w/d. Due to it being b/v and also the way the back door porch is I decided to make it free standing rather than with a ledger board.

sifting through the standards for the design I have discovered it recommed 2/90x45 or 2/120x45 etc for the bearer size. Is there no way I can get away without doubling up the bearer timber?

Read the full thread at RenovateForum.com...

All times are GMT +11. The time now is 10:41 PM.

NavTabs provided by vBNavTabs (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.

Copyright © U-Beaut Enterprises 1999 - 2016. All rights reserved.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.