high ceilings and canopy rangehood

Printable View

27th January 2009, 01:40 PM
Reno RSS Feed

high ceilings and canopy rangehood

I have 3.1m ceilings and am about to purchase a canopy rangehood with a flue cover that extends to 1180mm that I want to duct through the ceiling as it will be mounted to an internal wall. The problem is that if I mount it say 700mm above the benchtop. I will have a 320mm gap between the ceiling and the end of the extended flue. The manufacturer does not sell additional flue covering as an accessory. Does anyone have any suggestions to solve this problem??

Read the full thread at RenovateForum.com...

All times are GMT +11. The time now is 10:21 AM.

NavTabs provided by vBNavTabs (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.

Copyright © U-Beaut Enterprises 1999 - 2016. All rights reserved.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.