Door Jam width for a Solid Core Door

I am planning a door jam to hang a 770mm solid core door on.

As a rank amateur, I don't know how much gap to allow each side of the door. That is, how wide should the jam be, internally.

I have been advised that 3 hinges are the go.

Any advice greatly appreciated

Cheers

Mark

With solid core 3 hinges definately, i would allow about 5-6mm assuming you can plane the door a little afterwards if you need to.

Quote:

---

Originally Posted by Claw Hama

With solid core 3 hinges definately, i would allow about 5-6mm assuming you can plane the door a little afterwards if you need to.

---

Thanks Mate - 5-6 mm it is.

Planing has never been my forte :doh:, so I hope it fits :2tsup:


Mark