Printable View
Hi guys,
can anyone out there point me to a seller of timber which is suitable for cladding fences or gates with. To give you more of an ideas what i'm on about have a look at www.screenstylewa.com.au. They have a great idea when it comes to stylish looking gates and fences. I have rung some big players in timber with no luck, i'm getting to be on my whits end...also some pics of what to expect from screenstylewa.....
Look like 90 x 19 hardwood decking (unreeded) to me. Try asking for hardwood baluster material.
Mick
Would agree with journeyman Mick.
No reason why hardwood decking material would not work.
It'll just be your choice what types of wood.
And Kiln dried perhaps for minimal warping.
Do some research about Paulownia. I believe it is as good as WRC but cheaper
Try Bosch Timber Flooring at Wangara or Myaree.
They can source hardwood pencil round from the eastern states that will do the job.
thanks fellas, appreciate it...
glock40sw,
I tried Bosch as you directed and I was told that they onlt do timber flooring, tongue and groove type stuff. They put me onto a mobn called Timber west that can mill timber down (expensive)
I THINK I'M ????? OUT OF LUCK AGAIN..
I think you need to try a bit harder. Go ask your local hardware store or pretty much any timber merchant and they should be able to help. Just ask for unreeded 90 x 19 decking as Mick suggested.Quote:
Originally Posted by PROWBY
If you wanted you could even let you fingers do the walking:cool:.
OK...Did you talk to David?Quote:
Originally Posted by PROWBY
He is the owner and Boss.
Also try Floors by Nature 42 Daly street, South Fremantle
Talk to Dennis or Jason
Tell Dennis you were talking to Trevor from Grafton