Cavity Slider Instal problems

Help me!!

I just dont get these things

Firstly, they are supplied without instructions!! Great...normally dont read them anyway... but right now I could use them.

Here is my problem - I have pulled the wall down, made a lintel, and plumbed up the frame. This was the easy part

The part that is perplexing is that the frame has pre screwed screws to hang the track from. But how these things are made, you cant get a screw driver into these screws to tighten them and thats just the start of my problems

Is there an instruction sheet for these things that anyone knows about?

or

can some one run me through the process?/

Cheers

GMC

PS My other problems include

* What are the wedges for in the parts kit?
* The track extends out of the frame, which I have attached to a a piece of timber that I have extended from the frame - Is this right
* How do I make the door hang correctly - is there any tricks

Quote:

---

Originally Posted by GMC

The part that is perplexing is that the frame has pre screwed screws to hang the track from. But how these things are made, you cant get a screw driver into these screws to tighten them and thats just the start of my problems

---

There should be keyhole slots in the track. Maneuver the track over the screws, and slide it towards the cavity to engage.

Quote:

---

Originally Posted by GMC

Is there an instruction sheet for these things that anyone knows about?

---

What brand is it?

Quote:

---

Originally Posted by GMC

can some one run me through the process?/

---

Probably, if you post some pics and explain what you’re having trouble with.

Quote:

---

Originally Posted by GMC

* What are the wedges for in the parts kit? .

---

They’re probably to keep the door centred in the cavity. There should be two of them, which you attach to the frame at the bottom of the cavity opening in the frame assembly. They overlap the bottom of the door, and as you slide them upwards they stop the door from rattling around in the cavity.

Quote:

---

Originally Posted by GMC

* The track extends out of the frame, which I have attached to a a piece of timber that I have extended from the frame - Is this right

---

Yes, but if you post pics it would be clearer to see exactly what you’ve done.

Quote:

---

Originally Posted by GMC

* How do I make the door hang correctly - is there any tricks

---

There’s lots of tricks to hanging a door. That’s why a chippy gets more peanuts than a monkey pushing a broom.

John thanks for that.. I'll post some pics and see if they help you understand.

As for brand - its a "Doors Plus" purchased door - there is no brand on it!! i think they made it them selves

Leave it with me I'll get some pics up

Thanks for the reply

GMC

PS I respect every chippie out there - they are worth more money!

Here are some photos to help you guys help me

The frame of the door went in very easily.. it is plumb/square and secure. (this was checked with a plumb bob this morning!)

http://img40.imagevenue.com/loc692/t..._122_692lo.jpg

The tin strip that acts as the runner is attached on the inside of the frame - and I am planning (if its the right thing to do) is extend a piece of pine out to attach the rail too

Here is where I will extend it from

http://img129.imagevenue.com/loc375/..._122_375lo.jpg

Here is another angle

http://img175.imagevenue.com/loc1031...122_1031lo.jpg

Thanks in advance

GMC

You should have a head which will be 2 pieces of timber joined in an L shape.You need to fix this to the cavity unit and the jamb on th eother side,and hang the track of this.

Tools

Quote:

---

Originally Posted by Tools

You should have a head which will be 2 pieces of timber joined in an L shape.You need to fix this to the cavity unit and the jamb on th eother side,and hang the track of this.

Tools

---

Thanks Tools

I have done this

It showed me how unsquare the current wall is, and I think this is the problem I am having

I will keep playing with the frame now with the "head" on it

Cheers

GMC

Hey GMC - what brand is that door?

I'm about to buy one and do a similar job. Let us know how you solve the problems/

cheers

Quote:

---

Originally Posted by DNL

Hey GMC - what brand is that door?

I'm about to buy one and do a similar job. Let us know how you solve the problems/

cheers

---

I bought it off Doors Plus - I think it is a Noble door - It costs me $235 including the door!

I have it up now, and the best advice I can offer - Is keep it square - I had all types of issues with the current space being out of kilter... as soon as I made the HEAD as mentioned above it all made sense

Had to use a lot of "Packing" but got there in the end

Good luck with your project

GMC

thanks for that....doors plus is where we are going to head as well. They are advertising up to 50% off some doors at the moment, so we might be buying a few and a new servery window if they sell those.

cheers for the advice