Yellow Tounge over Floor Joist & Beares /

Printable View

18th September 2007, 06:49 PM
PlasterPro

Yellow Tounge over Floor Joist & Beares /

:) I am about to lay some yellow tounge over joists(90mmx45mm @ 450 centres) on bearers (90x90 @ 1250 centres)
first question is, what sort of spec should timber be ?
have already done one room in house useing this dimention timber and can`t rember if it was just straight kd hardwood.
Room is 3.6x3.7 apx
second question what size can i get yellow tounge in as i need it at 3.7 so a 4.0 or 4.2 would be good (is 3.6 the biggest size?) should come in 1200mm yeah?
third question , how deep should i sink concrete post in groung -have been working on 500mm-600mm?

thanks in advance :D
18th September 2007, 08:21 PM
TermiMonster

The standard yellow tongue is 3600 X 900mm. I have never seen it larger, but that doesn't mean you can't get it.
Can't help you with anything else off the top of my head.
TM
18th September 2007, 09:12 PM
PlasterPro

900mm wide will be 4 wide,
but a bugger that 3.6 is the biggest, shame to have to put butt joins in...:doh:

All times are GMT +11. The time now is 12:30 PM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.