I have learned the trick of storing a paint roller in the fridge between coats/overnight. :D
How long can you store a paint roller in the fridge between coats? i.e. 1 day, 2 days, etc.
Does the type of paint used make a difference?
Printable View
I have learned the trick of storing a paint roller in the fridge between coats/overnight. :D
How long can you store a paint roller in the fridge between coats? i.e. 1 day, 2 days, etc.
Does the type of paint used make a difference?
Sounds like an old wives tale to me! I wrap rollers and brushes in cling wrap, and have used them up to a week later.
Don't know about fridge. I wrap mine in plastic shopping bag, the important thing is to keep the air out
I use cling wrap, if doing a caot later that day. I only use the bulk pack from Bunnies, 12 for about $15. If its going to be any longer, i just toss it out and use a new one next time.
As above with cling-wrap for over night. Disposable foam rollers if using oil based paints.
I wrap my rollers in plastic bags with labels to know which ones which and wrap paint brushes in glad wrap. I kid you not, l have been able to use some of my rollers 4-5 months after going in the fridge. As long as they are air tight the paint doesn't set and they are fine to use.
I just soak them in a bucket of water (hanging on the roller handle on the outside of the bucket) overnight and wring it out the next day. This way they are ready for immediate use.
Peter.
Hi
Yes, the plastic bag or cling wrap is the way to go.
It is not the temperature as much as the air that dries them out. If you are using acrylic paints then resting them in a bucket of water so the bristles are covered with water will also work for 24-48 hours - in fact I inadvertantly left my brush this way for over a week and it was still ok to use :D
Hi Brian,
I pressume you are talking about the ones that come sealed in a yellow/black coloured bag and they are pink in colour?.
If so I have been told I should wash them out first or they will leave little bits of hair (or something like it) it the applied coats which makes the job look daggy:((.
Cheers
MH
Good practice with any new roller cover, MH, as I understand it.
Metal head they're the ones I use, i think. AS scooter said, all should be washed out prior to use. I leave them a bit damp, so it doesn't dry too quick in the roller