-
help 70s render !!
Hello all,
I am thinking about Painting / re rendering my house But face the problem of 1970 render job !! -the attached pics should tell the story
Can anyone give me some tips on sanding/chipping/cutting of this render so i can paint to give a more modern smoth look or should i just gurnie and paint over textured renderAttachment 41060
Attachment 41061
Attachment 41062.
Must have been the crazy 70 drugs for this render job :D
Thanks all
-
Render Woes
A small electric jackhammer and a wide blade may be the answer. It would be almost impossible to flatten it out, so removal may be the answer. what a job!!!!
Kind Regards Mike.:wink: :wink: :wink:
-
Try ingesting some of those crazy drugs and you may be able to live with it.:D
However if you find yourself having a bad trip, I suggest you get as far away from there as you can.:p
-
Hi all
My suggestion may cost more but its heaps easier, there are a few new products out there for cladding - I have seen one that makes it look like limestones and there are those that are like strips of granite - I notice bunnings have them (looks like a stack of 20-30mm pce of granite, it comes in a tile like arrangement).
Otherwise you maybe able to have it rendered again, making it flat? :rolleyes:
Celeste
-
As Mike has suggested use a small jack hammer with a wide chisel. Cost you about $70 and some hard Yakka. If you remove the big chunks carefully you can finish the wall with Dulux render effect paint. I think that would be the cheapest option. Good luck...
-
Ok, hire from kennards, they have best tools for job. Show them pics and they will give you the correct bit to remove render. I know that as you work, if you whack the section with a small club hammer, it will come off easier when you use a 'kanga' or similar. As for re-rendering, see my post for rendering in this section and post me for any further info.
Best of luck. Many hours work, but you can do it.
-
Is that what they call Stucco?
-
It's not stucco,and I would think it would be easier to render over it if it is sound.
Tools
-
Like Tools I would be inclined to knock off any high bits and render over if soild. The Spanish look was all the go for a very short time.
John.
-
have to say that i'm with tools and johnC - having just gone through the motions of chipping off quite a bit of render its quite simply a pain - if you are knocking off some high bits and you get some drumming (from disturbing the render) you might have to trace these till you get to a solid base - good luck
if you do go down the chipping off line get a few mates and have a back to the 70's party together with relevant drug fuelled mixes and cocktails