Advice on low lying deck

Printable View

26th February 2007, 12:42 PM
groovemachine

Advice on low lying deck

Morning members,

I'm at the stage of building my deck, this has a height of approx 200mm from the house end to 400mm from finish end. Bearers and joist are H3 treated hardwood.

My question is, can i get away with a Fishplate or 50x50x6 galv angle for the stirrups (posts) every 1800 set in concrete? :)

Your thoughts.....

All times are GMT +11. The time now is 04:47 PM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.