Fixing hardwood screening

Printable View

7th December 2006, 01:25 PM
DEVLPA

Fixing hardwood screening

Will be fitting 42x19 Kwila battens as screening to a deck, fixed to 45x45h/w & 68x68hw posts. What would be the best method to fix (coil gun/finishing gun/screws etc and what nails clouts/decking nails etc etc)

Photo of proposed battens attached.

Thanks
7th December 2006, 01:42 PM
Vernonv

I'd go for screws.

Might take a bit longer to do, but will give the best holding power.
7th December 2006, 03:55 PM
Pulse

how about a 50mm Gal batten screw in each end?

Cheers
Pulse

All times are GMT +11. The time now is 01:02 AM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.