Rose Mahogany problem

Printable View

24th March 2003, 04:03 PM
AlexS

Rose Mahogany problem

I have a 20+ year old lounge made from rose mahogany (Not Rose Porteus) with a polyurethane finish. Some elements now have a gummy surface, which I understand is not uncommon with rose M. (maybe Rose P too). My questions are
1. what is the best way to remove this gunk, and
2. is there any way of preventing it happening again?

I guess I may have to remove the polyurethane to stop it happening again.

Thanks,
Alex
24th March 2003, 06:50 PM
Neil

You could try our Polish Reviver . Sometimes it isn't whats beneath thats the problem but whats on top. You have nothing to lose by giving it a go and lots to gain. It could save you the rather large and unpleasant job of having to strip off all that polyurethane that won't want to come off without a fight.

Just a thought. It won't make it any worse that's for sure.

Cheers - Neil. :D

Bit of blatant advertising. Gotta pay for this BB and website somehow.
25th March 2003, 07:41 AM
AlexS

Thanks Neil - thought that might be the go to clean it up. Will give it a go.

All times are GMT +11. The time now is 02:19 AM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.