Smoothing masonite joins

Printable View

18th April 2006, 09:40 PM
elphingirl

Smoothing masonite joins

Hi all

I am hoping someone can suggest what might be the best material for smoothing off two pieces of masonite joined at right angles (like an external plaster join). The masonite is smooth side out, and is pre-primed. I was thinking Polyfiller, but it is in an area where it might get damaged easily, so I was wondering whether I could attached some metal plaster corner, and use plaster top cost.
I also have the situation where the masonite meets plaster surface too.
Any comments appreciated, cheers
Justine
18th April 2006, 10:03 PM
aussiecolector

I have always used a cover strip over versalux on external corners. It may be possible but I'm no plasterer.

All times are GMT +11. The time now is 07:45 AM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.