Creation of resin-impregnated, compacted cloth layers (aka "Micarta") - WIP kinda...

Hi all,

(takes a deep breath as this is going to be long)...

Well I made a pen from this stuff, but it was originally made by me with the purposes of using it for a knife handle. I have since moved away from full tang knives and so I had some of this lying around and it made a very nice looking pen.

This material feels nice, takes a nice shine, is super tough and can be made to basically whatever size/shape/dimension you want (although trimming will be necessary).

Warning: it is VERY hard. Be prepared to sharpen any tool you might want to use - often.


OK. So, how to make it...

First off get the stuff together in one of the attached photos. Notice that I didn't forget to get the screwdriver or paintbrush they are just "cleverly hidden".

When choosing the cloth, remember that it will look permanently wet, so they will be a lot darker than they appear dry. You will also need to have ripped the cloth into rectangles about the same size as your metal plates. This takes a LONG time, do it in front of TV. Also, take the time to calculate how much you will need it is very suprising. Think several square metres... My blanks are about 60 pieces of cotton thick which makes it approx 12-15mm. I wouldn't use anything other than cotton or linen (basically natural materials) as I don't think that I would trust proper bonding with synthetic materials. Also, I know that some people have used things like soaked paper which apparently looks quite nice.

Now, the metal plates, they should be strong enough that they don't bend under a LOT of force - or at least don't bend much. Mine are grip plate about 5-8mm thick. They will stick to your resin if you don't cover them in in clingwrap.

The clamps are to jam the whole thing together at the end, but it is best to have them handy.

Put on the gloves as the plastic lives a life of its own - regardless of how careful you are, it will get on your hands and won't come off.

The other stuff is all for the the resin. Use the screwdriver to open the tin and fill a 200ml disposable cup with the clear casting resin. Add 2-3ml of catalyst (using the pipette) and stir with the stick. Pretty tough so far huh?

Now using the disposable brush (as this REALLY destroys brushes) that you have on hand; just like mine :o .

Now get a piece of the cloth and paint on resin until it is ENTIRELY soaked. Wet isn't enough, soaked... Then get the next and the next and keep on painting on the resin making sure that every layer is soaked. This will use more resin that you expect - don't be shy, better to use too much than too little.

I have found that you can put down two pieces at once and still wet them enough to soak through. I will leave you to decide how to stack you cloth. At this stage you may also want to think about shape in your stack. If you fold over some bits of cloth and wrinkle them up, the result is likely to be more interesting... My first trial used the grip plate with the grip side in, but this meant that there were some gaps in cloth (which were filled with clear resin). This may be fine, it may not. Just think about it. I know some people who put a piece of wire on the top to get that extra pattern in their work, but I think this runs the same risk as the grip plate patterns.

I meant to take photos of this, but it is pretty important to keep things rolling and it was getting pitch black outside (and this can stink a bit and if you do it in your shed, don't plan on going in there for a week or so).

Thus, no piccies... sorry. If you have any questions, please ask.

Now, 60-70 pieces of cloth and about three cups of resin later...

You put the other bit of steel on the top and crush it down with the clamps. Try to do this as evenly as possible, as hard as possible and if you have soaked the material properly, it should spew resin out the sides - so do it over something that you don't care about. The second attached pic shows this.

After 24 hours or so, depending on temperature, amount of catalyst and your patience levels you can take the clamps off.

The result will be a heavy block of pseudo-micarta (Micarta is a tradename). This will need quite a lot of the edge trimmed off, but should be an interesting addition to many possible wood working projects. Remember, if you cut/file through it you will expose lower layers making for an intersting pattern. Remember that there is no need to be gaudy with this either, you can use dark/dull colours too, but as I said, remember, dark colours will be even darker as they are effectively "wet".

The result might look something like:
http://www.woodworkforums.ubeaut.com...ad.php?t=29696

I will show pics of this batch later on when I get a chance - maybe on the weekend?

Please feel free to ask any questions if something isn't clear.

Cam

Cameron.
Wow, the lengths that people will go to to achieve something different. Looking forward to seeing the result.

Kev M

Great Scott, Cameron! :cool:

I looked at that and thought "whats this Micarta stuff, what is casting resin, cloth?, can you add other stuff for different effects, is the resin dangerous...."

I'd like to read more, seems that you've got an interesting thing going on.
Good on you.

Yeah, it is a fair amount of work, but the result is good (and as I said, it started out life as knife handle materials as this stuff gives a nice positive grip whilst also being waterproof - pretty handy for a knife!)

Anyway, here is a pic of the first piece I made (and also the first piece I have turned).

http://www.woodworkforums.ubeaut.com...2&d=1142856345

Cam

ps Sorry dial uppers, I didn't know how to put in a small piccie linking to a larger one.

Very impressive

Skew posted these questions in the pen forum:

Quote:

---

I know you say it takes about 24 hours for it to go off (depending on temp., resin mix and how you hold yer tongue) but how long is the actual resin workable? An hour or two? Let's say I've saturated and stacked my 60 layers and want to add some artistic creases, is this something I'd have leisure to arrange or would I have to clamp up ASAP?

Also, when casting foreign objects (eg. spiders, coins) in clear resin I've had to coat 'em with... errrmmm... :o I forget :o something'r'other first to avoid air-bubbles. They a problem with layering cloth?<!-- / message --><!-- sig -->

---

My answers:

The workable time varies a lot depending on heat and amount of catalyst used. I have had it get thick and gluggy (unable to be spread) within about a half an hour, but in the cool with little catalyst it can be workable for a few hours.

The sooner you clamp the better - as that way the resin will still be at its moistest stage and you can really force those air bubbles out by crushing the cloth down as hard as possible. However, there would be some time to play around if you wish, just my advice would be do it quickly and set up the clamp as quick as you can.

As for casting foreign objects, that is because the other thing may have a tendency to trap air bubbles beside it - this is avoided in two ways.
1. The cloth isn't just embedded - it is soaked, so there is no room for air bubbles. Last I looked it was hard to soak a beetle or a coin.
2. The crushing force should push all air bubbles out later. This really should be about as hard as you can get it. I know people who use 12 tonne presses to do this. I don't know what tonnage I can get with a clamp, but I would guess that I am not too far off that number...

Cheers

Cam

Quote:

---

Originally Posted by Clinton1

Great Scott, Cameron! :cool:

I looked at that and thought "whats this Micarta stuff, what is casting resin, cloth?, can you add other stuff for different effects, is the resin dangerous...."

I'd like to read more, seems that you've got an interesting thing going on.
Good on you.

---

Thanks Clinton,
Clear Casting Resin is basically like any polyester resin, but it is crystal clear. Now, if you were doing darker or duller colours, I would recommend NOT using casting resin as it is a lot more pricey than normal polyester resin, but for the brighter colours, I reckon that it is worth it. This process takes a while so you may as well do it right.

As for whether the resin is dangerous, nope, well, I mean I wouldn't suck in the fumes nor drink it or anything equally silly, but it is just a thermosetting plastic. Note, this can also be done with a good quality slow setting two part epoxy (not the five minute stuff). The epoxy colouring isn't quite as nice, and the epoxy is more expensive though and this really gets most of its strength from crushing the fibres together rather than the strength of the bonding substance...

As for adding other stuff, well it depends... If it can be thoroughly saturated, then yes you can use it for this process. That is why paper works - I have thought about giving it a go with newpaper - that way you may also get the printing adding texture... Tissues would work, but I don't know that sounds very interesting. I can't really think of much else. You could try kitchen wipe/sponge cloth things - but I wouldn't guarantee it. Basically, I would prefer to use natural materials that I KNOW soak properly.

Now, if you are meaning casting things such as coins or bugs or photos or all manner of other things... Well, that is a different process. You use a mould and pour the resin very carefully, but then it was behave like resin, not like this - which is a lot harder.

A final thing, if you used epoxy instead of the casting resin, I would trust the bond and you COULD incorporate other things, but I would try to keep them a flat as possible with a good number of soakable layers between them. An interesting trial might be to use aluminium foil or the like. Only use it at one thickness at a time and make sure that you lay it flat with no air bubbles and several (minimum ten) layers of cloth on each side... Come to think of it, that might work equally well for the resin too... Also, if you puncture the foil (or whatever you use), the resin will bond through those hole when you crush it down, effectively bonding the two sides together and holding the foil in place anyway!! :D

As for wanting to read more, I will post some more later, but if you have anything specific, let me know.

Oh two more things:

1. The outside may remain a little sticky, that doesn't matter so much. It is the inside that really matters and as the resin "goes off" with heat, the inside will set much earlier than the outside. If the stickiness concerns you, you can wipe it off gently with acetone.

2. This can be cut using any wood working tools, but I have bent saw teeth with it and so now I only use metal work tools on it. For instance, a metal cutting blade in a bandsaw and hacksaws and drills on SLOW speeds and files (that you no longer care about). :D

My next post will likely include me taking the clamps apart (oh, and swearing cause the damned thing didn't work as it got too cold over night here in Tassie ;) ). ASSUMING that it did work, then it will show me trimming up the edges and hopefully result in a turned pen - although as I said, this can be used for pretty much anything wood can be used for. I have thought seriously about making a coffee table top from it.

Cam

Your effort of making your own materials has inspired me.....

.....I just planted a mango.:D

Plus mango trees smell a lot better than stinky plastic! :o

Thanks Cameron.
I had a surf and checked out some sites and their info. "Arms ModelIt" have an ok site. I am sure there are some good books out there.
Is Barnes Clear Casting resin the one you use?

I think it is Barnes - yes.

I am not sure about sites or books. My reading has been from the internet, my resins all come from our local fibreglass shop. I have also seen it is fancy craft shops/art shops.

Cam

To file this stuff, take the desired file and wrap some sandpaper around it. Works much faster and doesn't hurt the file.

Also useful to know if you ever have to work with carbon fibre or kevlar... ;)


Cameron, great idea. Might have to give it a fang myself one day, although I don't know what I will use it for.

Cameron, instead of clamps, to make things a little easier for yourself have you considered making a frame and using one or two of these 'clamps' from Mr McJing.

Sorry, would not let me upload as file image is already here:
http://www.woodworkforums.ubeaut.com...ad.php?t=24829

I have thought about making a nice big book press style clamp, but I have never got around to it. The problem is that this works and so I have never got around to doing it differently - maybe one day.

As for your advice Schtoo, absolutely right. It will murder your files. I bought a sur-form - or whatever it is called - rasp but it also got blunt very quickly. I now have a special sander thing that holds the paper flat.

You can also use disc sanders etc, but be VERY careful not to overheat it. I used gouges and skews to turn mine, but I blunted about 8 tools in the process - LOTS of sharpening.

Cam

Quote:

---

Originally Posted by CameronPotter

My next post will likely include me taking the clamps apart (oh, and swearing cause the damned thing didn't work as it got too cold over night here in Tassie ;) ). Cam

---

Grumble grumble... :mad: :mad: :mad:

I had to go and bloody jinks myself.

There are two possibilities as to what went wrong (and I think they both went wrong).

The block split when I tried to cut it - I fixed that by supporting the back of the pseudomicarta.

The block split when trying to drill it - I fixed that by drilling it in larger block before trimming it down.

The block split on the lathe... I gave up.

I investigated why I had splitting. I noticed that it either happened towards the outside of the block, which meant that it was too cold (serves me right for doing late at night in Tassie). I should have either started early in the morning or set up a heatbox. I have the stuff I need to build a good heatbox (thermostat controlled), but haven't got around to building it...

The other reason that it split was that as I was doing this late at night and rushing, I didn't listen to my own advice and on ONE layer I didn't soak the cloth enough. This was where it split when I was drilling and turning. There isn't a lot that can be done to fix this.

Now I have a lot of little parts that I will use for laminations but little else.

Oh well.

Anyway, this is what it looks like coming out of the mould...

I may (or may not) have another go on the weekend.

Feeling sorry for myself right now. :(

Never mind. I made my first Pen2 tonight though and it turned out quite well. :rolleyes:

Cam