embedding plaster paper tape and base coat over the top in one go
My question is about base coating over wet paper plaster tape. I know plasterers say to embed your paper tape without putting base coat over the top of it until it has set. I assume this is to avoid getting bubbling in the tape. I have found this works to help avoid getting bubbles. However I have also found that if you use a really wet mix I have been able to plaster over the top of the wet tape as well in one go without getting bubbles. I have also found that if I use a nice creamy mix and spray the base coat with water before putting the tape on this also avoids getting bubbles in the tape and I can base coat straight over straight away without having to use a sloppy mix. I havn't come across any problems with this spraying a light water mist before taping method. can anyone tell me if this is a bad thing to do or is it ok? Also I've noticed plasterers using mesh tape for ceiling cut out repairs. I assume to save time and they must think if everthing is done well and if there is plenty of noggins and rafters then its not too bad using mesh tape sometimes. Look forward to reading your comments!
