Printable View
G’day all, I have recently obtained a Carbatec drum sander (WDS 4080P).
The machine doesn’t have a roll installed that I can copy and cut.
I have a new 25m roll of paper but I’m unable to find a template or measurements of the correct end angles to cut. Dimensions or links very much appreciated. Thanks..
Matt
Sent from my iPhone using Tapatalk
Then go to Carbatec and buy a pre-cut sanding wrap for drum sanders (76.2mm X 2305MM) which is as per their web site:doh:
I have the same machine. If you cut a long strip of ordinary paper the same width as the roll of sandpaper you have already purchased you can roll that onto the machine and the cutting angles for the ends will be self evident and the length wil be correct.