Cut and emboss

Printable View

20th April 2022, 06:47 PM
russ57

Cut and emboss

G'day
I know some of you have partners interested in various crafts.
My wife has been gifted with a 'spellbinders grand calibur' embossing machine. Unfortunately it is missing the cutting mats and plates.
Just wondering if anyone may have one or know of one in captivity who could measure the thickness of each plate. I believe they are probably polypropylene, with one a thin rubber.
(the machine is red, and the plates are about a4 size)
Thanks
Russ
20th April 2022, 08:27 PM
Chesand

Google could be your friend as there appeared to be replacement plates available when I looked to see if the machine is similar to one that my wife has for card-making.
20th April 2022, 09:10 PM
russ57

This particular machine is relative old, and while there are one or two, the baseplate in particular is not available in aus.
Im sure that something can be substituted, if i can find the correct thickness.
I can probably also work it out by trial and error.

All times are GMT +11. The time now is 02:34 AM.

This website and its content is copyright of U-Beaut Enterprises.
Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following:

♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only
♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge
Woodwork Forums as the source of the material.

You may not, except with our express written permission, distribute or commercially exploit the content.
Nor may you transmit it or store it in any other website or other form of electronic retrieval system.